Camera Control Unit * Interfaces with Sony DXC-D55P Series digital cameras(*1) via its associated CA-D50 Camera Adaptor. * The output of the CA-D50 Camera Adaptor is transferred to the CCU-D50P Camera Control Unit as a component digital SDI(*2) signal via a Sony CCZ-A 26-pin cable up to 75 m long. * The distance between the CA-D50 Camera Adaptor And CCU-D50P Camera Control Unit can be extended to a maximum 200 m by providing a separate low loss coaxial video cable to carry the SDI signal between the two units. * Switchable to accept analog component/VBS signals from DVCAM camcorders, DSR-570WSP/370P, equipped with a 26-pin interface. Maximum cable length from the camcorder to the CCU-D50P in analog transfer mode is 300 m(*3). * Outputs analog composite And one of the following: component digital SDI, analog component (Y/R-Y/B-Y or RGB), or S-video(*4). * Flexible intercom connectivity allows the interfacing of 2-wire or 4-wire systems. * Green tally indication included for use in mid to large-scale camera operations. * The RCP-TX7 or the RM-M7G can be connected to the CCU-D50P. (*1) Some DXC-D35P Series of digital cameras may require software upgrade to use the CCU-D50P. (*2) Embedded audio is not supported. (*3) The distance between the camcorder And the CCU-D50P may vary depending on system requirements. (*4) Available output signals depend on the connected camera or camcorder.
