10L80 10L90 Automatic Transmission Filter [17-UP]

REMCO TRANSMISSION PARTS Verified independent store

→

Keeping the fluid circuit clean in a 10L80 or 10L90 unit starts with a filter that fits the intake correctly, and this replacement filter is cut for exactly those two transmissions without any modification. It covers units built from 2017 onward, so if the transmission code on the case reads 10L80 or 10L90 and the vehicle left the line in that window, this is a direct application.The 10L80 and 10L90 are 10-speed automatic transmission platforms that share a close family relationship in their internal layout, and the filter position and inlet geometry are the same between them, which is why one part covers both codes. A worn or clogged filter in these units can starve the valve body of clean fluid, causing shift complaints, pressure drops, and premature wear on clutch packs, so replacing it during a service interval or during a full rebuild is straightforward maintenance.This listing covers one filter, part number CFI-005290, at 0.5 lb. It does not include a gasket, a pan bolt set, a solenoid, a seal kit, or any other component. If your job calls for those items, they need to be sourced separately. REMCO has kept individual parts available alongside full kits since 1991 so technicians can fill in exactly what a job needs without buying pieces they already have.Before placing the order, pull the transmission code directly off the case and cross it against 10L80 or 10L90. Also confirm the production year is 2017 or later. If either of those points does not match, this filter is not the right application. A direct-fit filter for 10L80 and 10L90 automatic transmission units keeps fluid flow clean and supports proper hydraulic pressure through the valve body and clutch circuits. This listing is for the filter only. It does not include a gasket, pan, solenoids, seals, or any other component. Verify what else your rebuild or service job requires before ordering. Designed specifically for the 10-speed 10L80 and 10L90 platform, this filter matches the inlet and outlet geometry of those units without adapters or modification. One transmission filter, 0.5 lb. The part number on file is CFI-005290. Weight reflects the single unit as shipped from inventory here. Before ordering, confirm the transmission code stamped on the unit matches 10L80 or 10L90 and that the model year falls within the 2017-and-up production range this filter covers. Show more