RE5R05A Filter 2WD 4x4 16 Bolt Holes Rectangle Pick-Up [92-UP]

REMCO TRANSMISSION PARTS Verified independent store

→

Getting the fluid pick-up right is the starting point of any automatic transmission service on the RE5R05A, and this filter is cut to the exact geometry that unit requires. What se ts it apart from a generic filter is the combination of a rectangle pick-up inlet, a 516 tall pick-up tube, and 16 bolt holes - three measurements that have to agree with the housing for the filter to seat flat and draw fluid without air.The RE5R05A appears in both 2WD and 4x4 configurations, and this filter fits both. Coverage runs from 1992 forward. At 1 lb the filter ships light, but the geometry matters more than the weight: a pick-up tube that is too short starves the pump under load, and a pick-up that does not match the inlet shape never seals properly regardless of how the bolts are torqued.This is a single filter, nothing more. It does not come with a gasket set, seals, solenoids, clutch packs, steels, or bands. If your job calls for those parts, they need to be sourced separately before the transmission goes back together.Before placing the order, cross the unit code against the vehicle you are working on and confirm the bolt hole count and pick-up tube height match what you pulled out. RE5R05A units built from 1992 on share this filter, but always compare the old part to these specs - 16 bolt holes and a 516 tall rectangle pick-up - before committing. Restoring proper fluid flow through the valve body starts with a clean, correctly seated filter - a clogged or wrong-fit filter causes shift complaints and internal wear that no other repair can fix. This listing covers the filter only. It does not include any seals, gaskets, solenoids, bands, clutch discs, or steels. Verify all other parts are sourced before ordering. This filter is specific to the RE5R05A unit: 16 bolt holes, a rectangle pick-up inlet, and a 516 tall pick-up tube - dimensions that must match your unit exactly to seat and seal correctly. Contents: 1 filter with rectangle pick-up, 516 tall pick-up tube, 16 bolt holes, for 2WD and 4x4 applications. Shipping weight 1 lb. Before ordering, confirm your unit code is RE5R05A, verify whether it is a 2WD or 4x4 application, and check that the bolt hole count and pick-up tube height match what is in the unit. Show more