Important NoteFor any application involving processing gas in the furnace, to ensure the safe use of furnace flange, please always install the two stage gas regulator to the cylinder. Read the furnace instruction to understand the pressure rating of each part in the system. Determine and limit the input gas pressure before the operation to avoid overpressure which could cause damages to pressure gauge, needle valve or other fittings. Failure to install gas regulator could cause severe personal injury. E.g. The max pressure for MTI mechanical gauge (pic below) in the flange is 0.15Mpa (22psi). It may cause pressure gauge broken when higher pressure is applied. Use the gas regulator to limit the input pressure to avoid overpressure.Installation 1. Connect the gas regulator to gas Cylinder. Install a 1/4" tube fitting to the outlet of the gas regulator. 2. Install another 1/4 tube fittings in the flange. Use a 1/4 stainless steel or PTFE tube (low pressure, 120 psi or below) to connect the gas regulator and flange. NOTE: Make sure the thread type of the 1/4 tube fittings before installation. For most gas regulator in U.S., the 1/4 tube fitting is required to have 1/4 MNPT thread type. For MTI flange system, the 1/4 tube fitting is required to have 1/4 MBSPP thread type. 3. Finish Installation. Please notice that the connector of the Hydrogen Gas Type Regulator is female POL connector. While the inert gas type Regulator is the male connector. Specifications of CGA-350 gas regulator Maximum Rated Inlet Pressure 3,500 PSIG Outlet Pressure Ranges 0-25, 0-50, 0-100, 0-250 PSIG Flow Capacity - Cv 0.058 Ambient Operating Temperature -40°F to +165°F Designed Leak Rate Bubble-Tight (helium) Weight 4.4 lbs Ports (4) 1/4" FNPT Inlet 1/4" FNPT Outlet 1/4" MNPT Decay Inlet Characteristic 0.26/100 psi Cylinder CGA 580 Material Brass Inlet Gauge 0-4000 Flow Capacity (SCFH) 900 Max Inlet Pressure (PSIG) 3500 Gas Argon,Helium,Nitrogen Max Outlet Pressure (PSIG) 100 Manual Option Flashback Arrestorto Cylinder Regulator. Flashback Arrestor Option Hydrogen detector Honeywell UL Approved Sensepoint Gas Detector, EQ-XCD-H2-LD
Related
Related
Related
Related