Challenger EW10CK-BMC-QC Completion Kit The Challenger EW10CK-BMC-QC Completion Kit supplies the above-ground hardware for the EW10 series inground lift: superstructure, 3-stage front and rear arms, bench-mount controls, and a QuickCycle power unit. This configuration provides 10,000 lb capacity, 88 inches of drive-through clearance, and a 24-second rise time, compared to 41 seconds on the standard EW1020. This kit combines two upgrades. Bench-mount controls (BMC) integrate into a workbench rather than a standalone pedestal for a cleaner bay layout, while the bundled QuickCycle (QC) power unit nearly halves cycle time. The 88-inch clearance accommodates lowering EV battery packs while retaining conventional cassette functionality for standard vehicles. The 3-stage arms with double-telescoping screw pads offer 20" to 42" arm reach for precise pick-point positioning across a wide vehicle mix, from compact EVs to full-size trucks, without swapping adapters. The bolster-free design leaves nothing to drive over when entering or exiting the bay. ALI/ETL certified. ⚠ California Proposition 65 Warning WARNING: this product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov . Features 10,000 lb lifting capacity for a wide range of vehicles, from compact EVs to full-size trucks QuickCycle (QC) power unit with a 24-second rise time, nearly half the 41-second standard EW1020 rise Bench-mount controls (BMC) integrated into a workbench for a cleaner, clutter-free bay layout 88-inch drive-through clearance, wide enough to lower EV battery packs while retaining standard cassette function 3-stage front and rear arms with double-telescoping screw pads and 20" to 42" arm reach for precise pick-point positioning Bolster-free design with nothing to drive over when entering or exiting the bay ALI/ETL certified for insurance compliance and inspection Specifications General Model Number EW10CK-BMC-QC (based on EW1020-QC platform) Certifications ALI/ETL Certified Superstructure Colors Black, Red, or Blue Capacity Lifting Capacity 10,000 lbs Capacity per Arm 2,500 lbs Arms and Reach Arms 3-stage front, 3-stage rear Arm Reach 20" - 42" Screw Pad Height 4" - 6.125" Dimensions Stroke 72" Rise Height 78" Drive-Through Clearance 88" Overall Width 118" Performance and Power Speed of Rise (QuickCycle) 24 seconds Motor / Voltage 3HP, 208V-230V, 60Hz, 1Ph Air Required 90 - 120 psi Controls Bench-Mount Controls (BMC) What's Included 4x EVFPK Low-Profile EV-Ready Foot Pads 4x Universal Foot Pads 4x 3-Inch Adapters 4x 6-Inch Adapters 4x Storage Racks
Related