Better than silicone Cold Weather AlertThis product may not perform properly if applied below the required temperature. Please check installation instructions on our website. Because this is a water-based product, it may freeze during shipping. For that reason we will not ship over a weekend if temperatures dip below 32 degrees F. If you want us to ship anyway, it will be at your own risk. Please call to arrange with a GBS eco-advisor. 888.727.2101 Clear is a non-toxic, ultra-low odor, elastomeric caulk and sealant for indoor or outdoor use (-40 °F to 200 °F) that outperforms most urethanes and silicones. Clear is moisture-cured, making it perfect for tough job-site conditions that are very dry or damp; it's also good in cold climates as it can be applied at temperatures as low as 30 °F. Use on wood, metal, glass, EIFS, EPS foam, concrete and stone. It works well in joints that expand or contract more than 25%. Unlike most silicones, CLEAR is rain-ready within 20 minutes, compared to 1-3 hours, and is paintable after 24 hours. Videos NOTE: We recommend using this product within 6 months of the date of purchase. NOTE 2: To smooth out Chemlink Clear, use only rubbing alcohol and not water or mineral spirits or anything with xylene. NOTE 3: ChemLink products do not adhere to polyethylene, HDPE or polypropylene (recycled plastics) [tabs] Why We Like It Applying caulk in cold or damp weather can be a challenge that holds up the whole job. CLEAR is the perfect multi-purpose product that performs better than some silicones with the advantage of being paintable and rain-ready within 20 minutes. Ultra low VOC 14.43 g/l and no odor when dry. Features & benefits Non-toxic — no formaldehyde, ammonia, latex, crystalline silica, ethylene glycol, exempt solvents, aromatic hydrocarbons, isocyanates, and no biocides or fungicides Application — will cure when damp, dry or cold as low as 30 °F Elastomeric — capable of joint compression and expansion without cracking 100% solids content — will not shrink Working temperature — performs in temps -40 °F to 200 °F Non-slumping — applies vertically and overhead Safe — for everyone, including the chemically sensitive; learn how to test a non-toxic product for tolerance Eco-friendly — ultra low VOC No odor — pleasant to use Lasting color — does not discolor when exposed to UV lighting NOTE: Do not use with mineral spirits or xylene, do not use in areas subject to continuous immersion and do not store in hot temperatures. Allow treated wood to cure for six months before applying. Contact tech support for areas subject to chemical exposure.
