Chemsan from Chemisphere UK is a top-quality acid-based rinse aid that all brewers should have on hand in their brew room! It is a powerful blend of phosphoric acid, benzenesulfonic acid and isopropanol, perfect for effectively cleaning brewing equipment before use for fermentation, bottling, and more. Similar to products like Star San and Craftsan. Chemisphere UK has a great reputation in the market as a leading producer of premium cleaning supplies for the hospitality and brewing industries. Their extensive range features a mix of trusted, established products and cutting-edge formulas, all crafted with the highest quality ingredients. With a strong commitment to customer service and technical expertise, Chemisphere UK has built a solid brand name and reputation in the industry, always placing a focus on sustainability and environmental responsibility. Instructions for use: Mixing ratio: Mix 10ml Chemsan in 5 litres of water for a 0.2% dilution. Higher concentrations will require thorough rinsing. All surfaces should be thoroughly cleaned and rinsed prior to using Chemsan. Chemsan should have a minimum contact time of 2 minutes. The chemical should maintain a pH of 3.5 or lower to ensure effective cleaning. Chemsan may become cloudy when diluted with hard water, but will remain effective as long as the pH is 3.5 or less. Clean all dirty surfaces with a suitable cleaner such as Chemclean, then rinse well before using Chemsan. Apply the fully mixed Chemsan to surfaces using a cloth, mop, brush, sponge, spray or by immersion. Ensure surfaces remain wet for at least two minutes, then allow to air dry. No rinsing is necessary after using Chemsan, unless a higher concentration has been used. Due to the acidic nature of the product, it is not recommended on soft metals. Danger warning: Chemsan - UN3264 Danger - Contains Phosphoric Acid. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection.Precautions: Harmful if swallowed. Corrosive to skin and eyes. Avoid contact with eyes, skin or clothing. Wear safety goggles and clothing during use. Avoid contamination of food. DO NOT MIX CHEMSAN WITH CHLORINE CLEANERS AS CHLORINE GAS WILL BE EVOLVED. Do not use or store near heat or open flame. See label for further precautionary information.In case of eye contact: Hold eyes open and rinse cautiously with water for 15-20 minutes. Remove contact lenses, if present, after the first five minutes. Then continue rinsing. Seek immediate medical attention.In case of ingestion: Seek immediate medical attention. If able to swallow, have person drink a glass of water. Do not induce vomiting unless directed to do so by a Poison Control Center physician. Do not give anything to an unconscious person.In case of contact with skin or clothing: Remove contaminated clothing. Immediately flush skin with plenty of water for 15-20 minutes. Seek medical attention if necessary.In case of inhalation: Move person to fresh air. If not breathing, call an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. Seek immediate medical attention/advice.
Related
Related
Related