Engineered for Fast Cooling with a 25 ft Copper Immersion Chiller If you’re searching for a 25 ft copper immersion chiller that cools quickly and hooks up easily, this is the go-to option for most homebrew kettle setups. Built from 25 feet of 3/8" copper tubing, this 25 foot copper wort chiller is designed to improve heat exchange where it matters—right in the hottest zone of your wort. Why This 25 ft Copper Immersion Chiller Cools Faster High coil placement: The coil sits higher in the kettle to focus cooling where wort is hottest for faster, more efficient chilling. Copper performance: Copper transfers heat extremely well, helping you drop temps quickly and get to pitching range sooner. Immersion chiller simplicity: No pumps required—just place the coil in your wort and run cold water through it. Features & Specs Chiller coil: 25 ft of 3/8" copper tubing Included water lines: 8 ft vinyl tubing on the inlet and 8 ft vinyl tubing on the outlet Inlet fitting: Female garden hose fitting (GHT) pre-installed for easy hookup Approx. dimensions: ~10" diameter, ~8" to top coil, ~15" to top bend Batch Size & Kettle Compatibility Ideal batch size: Great fit for most 5-gallon homebrew batches Kettle pairing: Especially well-suited for 8-gallon kettles and similar-size brew pots Hookup Tips for Kitchen & Outdoor Brewing Outdoor spigot use: Connect the inlet to a standard garden hose and you’re ready to chill. Kitchen sink use: If you brew indoors, add a hose-thread sink adapter (such as a faucet-to-garden-hose adapter) to connect at the sink. Immersion Chiller Setup Notes Use an immersion chiller to cool hot wort faster than an ice bath when hose access is available. Sanitize the chiller by placing it into the boil near the end of the boil period. Check hose connections before chilling so water leaks do not reach the wort or brew area. Related supplies: brewing equipment, cleaning and sanitizing.
