The Chugger Brew Pump MINI MAX - Inline Stainless Steel Head is designed to be a step up from the starter chugger pump providing many of the advantages of the MAX series chugger pump. This pump has the same flow rates as a standard chugger pump while providing 3X the HP allowing it to move hot wort far faster and easier. The housing can handle liquids up to 250°F and features a 1/2" Male NPT center inlet, and a 1/2" Male NPT output. When operating the pump, please note that the inlet should never be restricted, only the outlet. Please Note: The pump head and lines need to be full before the pump is started. DO NOT RUN DRY Specifications: Max Flow: 7 GPM 22.7 LPM Max Head: 18.6 FT 4.1 M Power: .125 HP .093 KW Electrical: 115V & 230V Inlet: 1/2" Male NPT Outlet: 1/2" Male NPT Non-Submersible 60HZ 50HZ RPM: 3500 Fan Cooled Motor Motor AMP Rating - Full Load Amps (FLA) Motor Only: 1.4 Amps Motor and Pump: 2.0 Amps Can handle liquids of 250°F Materials are FDA Food Compliant Components are UL Recognized DO NOT RUN DRY Includes: 316 Stainless Steel (Front Housing) 316 Stainless Steel (Rear Housing) PTFE (Thrust Washer) CLEAR Silicone (O-Ring) Ryton/PTFE (Impeller) 55" Cord (NO PLUG, ELECTRICAL KNOWLEDGE REQUIRED TO INSTALL) Chugger Max contains sealed bearings - no oil necessary
![Chugger MINI MAX Brew Pump - Motor Bracket [CPMINI-28]](https://cdn.shopify.com/s/files/1/2045/5257/files/22467-1-v2.jpg?v=1755621983&width=480)
