Overall Cable length is measured tip to tip of the 10-32 NF rod to end of wire. Provides 3 in. of travel. You may cut the wire end to a final desired length. Measuring Tip: To determine the proper length for your application, measure the tip-to-tip (overall length) by using a flexible rule to snake through the actual intended cable route. Your browser does not support our video. Pull with Confidence Pro-Werks Silver Jacket Drag Chute Cable Kit includes everything needed for installing a parachute release system. Available in a Single or Dual Release Cable kit. This complete parachute release kit includes the Silver Jacket Premium 33 series chute control cable, a CNC machined aluminum release lever, clevis end, cable mounting hardware, and weld-on tabs.The final overall length maybe altered by cutting the exposed wire end if required. Compatible with the majority of all parachutes currently available in racing today from Stroud, Simpson, RJS, White, Impact and Deist. Important Note: A parachute is an important system for slowing and stopping a race car. Should you need any additional assistance for the correct installation or use, please contact our tech support team. Product Specifications: Grooved housing for Clip Type mounting on one end 10-32 NF threaded rod on one end Exposed 0.075" diameter solid stainless wire on one end Provides a total of 3" of travel Flexible housing measures only .325" outside diameter Cable length is measured tip to tip Grooved housing on one end, conduit on the other end. Cable Overview: The solid wire core cable is desirable in certain applications such as a chute release, or when attachment hardware dictates a wire end.Two sizes are available to choose from, the final overall length may be altered by cutting the exposed wire end if needed.Fitted with efficient dynamic seals and requiring very little effort; these lightweight cables have a full circle of reinforcement wires to protect and support the inner liner, influencing positive load transfer with minimal lost motion. Rated at 50# pull and 40# push, intermittent loads may exceed these ratings considerably without failure. These recommended load ratings reflect a balance between maximum load and reasonable cable life.These aren’t a flimsy garden equipment control cable that will let you down when you need it the most. The Silver Jacket Premium 33 series parachute cable comes in the trademark silver color - that will compliment any paint color scheme.Ideal for any cable operated application that requires pushing or pulling, and very well suited for extreme use environments. This combination should be considered as an upgrade replacement for Teleflex Morse type push - pull control cables. Silver Jacket Cable Installation Tips (PDF) Quality Cable Hardware is a must Make the connection with this complete offering of cable mounting hardware and cable ends. This is the good stuff; high quality specialty hardware - not available at your local hardware store. Click this image to see the many mounting options available; including Cable Ends, Knobs, and Handles. Frequently Asked Questions Q: How do I measure for total cable length?A: Use a flexible ruler and snake it through the intended cable route. The cable length is measured from tip-to-tip of the attaching ends, not the cable housing mounting points.Q: My cable installation is close to the exhaust system. How do I protect it from the heat?A: When installing a cable in an excessive heat environment, incorporating a heat deflector shield with adequate air gaps between the heat source and the cable housing is recommended. Tech Tip For the most efficient and longest cable operating life it is recommended to install the cable so the heaviest load is in a pulling motion whenever possible.
Related
Related
Related
Related