CimeXa Insecticide Dust is the newest product available in the battle against bed bugs, fleas, ticks and other insects. CimeXa Dust is 100% Silica dust, is very safe, odorless, and will not stain. CimeXa Dust will last up to 10 years when applied to undisturbed areas like wall voids. It is very effective on bed bugs, fleas, and especially pyrethroid resistant bed bugs. It will work on ants, roaches, firebrats, silverfish, spiders, mites, lice, stored product/pantry/fabric/clothes beetles, moths and drywood termites. When pests come into contact with CimeXa, the product clings to their exoskeleton and absorbs the waxy coating, causing death from dehydration.How CimeXa Insecticide Dust WorksCimeXa Insecticide Dust contains 100% natural silica gel which kills insects by contact. When insects pick up the dust on the exoskeleton, it clings to and absorbs the waxy coating, causing dehydration and eventual death. CimeXa is best applied with a duster to avoid over-application. Because of its mode of action, CimeXa Dust takes longer to kill target pests. However, the natural ingredient has no properties that cause it to change or break down, so the dust is effective for at least 10 years when applied in undisturbed areas.CimeXa Insecticide Dust Target PestsAnts, Crazy Ants, Cockroaches, Firebrats, Silverfish, Spiders, Mites, Bed Bugs, Lice, Fleas, Ticks, and Drywood Termites.PESTS CONTROLLED WITH CIMEXA INSECTICIDE DUST:Ants, Cockroaches, Firebrats, Silverfish, Spiders, Mites, Bed Bugs, Lice, Fleas, Ticks, Drywood Termites. Kills Bed Bug Adults and Nymphs Kills Bed Bug Nymphs Hatched from Dusted Eggs kills Pyrethroid-Resistant Bed Bugs.Target UsesCimeXa Insecticide Dust can be used in place of other similar insecticide dusts and used in voids, cracks and crevices for most common crawling insect pests. Because of its stability, CimeXa Dust is ideal for tedious or time-consuming dusting treatments, such as treatments of wall voids or attic spaces. CimeXa Dust is also an excellent dust for bed bug treatments because there is no known resistance to it. CimeXa Dust is completely natural, making it preferable for use in sensitive accounts or locations.CimeXa Insecticide Dust Application InstructionsApply at a rate of 2 ounces per 100 square feet. Use a handheld bellows, bulb, or puffer bottle type duster to apply a light, visible film. A power duster may also be used. Power duster use is limited to cracks, crevices, voids, attics and crawlspaces to insure containment of dust particles. Focus on areas where insects or their signs are seen.CimeXa Dust may also be used as a spray, paint-on application, or foam. Combine 1 lb of product per gal. of water. Apply approximately 1 qt. of solution per 250 square feet of area to be treated. For injection treatment, add the appropriate amount of foaming agent to the product/water slurry and inject directly into galleries and voids.A 4 oz. bottle covers approximately 200 square feet. A 5 lb. pail covers approximately 4,000-5,000 square feet.Standard Application Rates 2 oz. per 100 square feet 1 lb. per 1,000 square feet – attics and crawlspaces Liquid application: Mix 1 lb. dust with 1 gallon of clean water. Apply 1 quart of solution per 250 square feet For use in the following areas:In and around residential, multi-family, commercial, industrial, institutional, municipal, agricultural, research, daycare, health care, educational, recreational, and office buildings, hotels, motels, garages, transport vehicles, warehouses, theaters, food handling and food processing establishments, Federally inspected meat and poultry plants.IndoorsIn attics, be sure to get dust near the eaves and vent pipes where insects often first enter, as well as around any pipes or potential access points between the attic and the main structure.The bottom drawers in kitchen and bathroom cabinets can be removed and dust applied into drawer wells. No dust should be left exposed when drawers are replaced.Cimexa Bed Bug Treatment:Remove bedding and take the bed apart. Treat the interior framework, joints and cracks in the bed frame. Treat the mattress and box spring, paying particular attention to tufts, folds and edges, and the interior framework of the box spring. Remove wall-mounted headboards and treat the back side. Treat picture frames, moldings, hollow furniture legs, cracks and crevices, along baseboards, and any areas with visible signs of infestation, including rugs and carpet. Treat upholstered furniture by removing or lifting (if possible) the cushions and treating the undersurface. Treat the interior framework, cracks and joints of the furniture, and the folds, tufts and edges of cushions and other upholstered areas. Do not treat toys and stuffed animals with product. Treat wall voids by removing electrical switch plate covers to allow access, but don’t apply dust directly in electrical boxes. Apply about ¼ oz of dust to each accessible void.Cimexa for Flea Control:Apply at a rate of 2 ounces per 100 square feet. Treat kennels, pet bedding/rest areas, floor and floor coverings (such as carpets), cracks behind molding and baseboards and other areas where pests may harbor. Apply as a light film or light coating over the target surfaces.OutdoorsCimeXa Dust is not intended for outdoor use.CimeXa Insecticide Dust Features Natural silica gel is safe, natural, and long-lasting Odorless and non-staining Effective even on pyrethroid-resistent bed bugs Labeled for use in a wide variety of locations Labeled for use in federally inspected meat and poultry plants Extra Tips Dust is best applied with a hand duster. In food areas, only apply dust in cracks, crevices, and other inaccessible areas. Any dust that is left visible after treatment should be removed and the exposed surface washed. Insects need moisture, so kitchen and bath areas and areas immediately surrounding them, and any other damp areas should be carefully inspected and treated if necessary.
