CineLR 7 6S O4 HD
The CineLR 7 O4 6S HD is a 7.5-inch long-range cinematic BNF drone designed for smooth cruising, clean DJI O4 footage, high-capacity battery setups, and easy maintenance. It combin es an H-shaped frame design, DJI O4 Air Unit Pro, BLITZ F7 Flight Controller, BLITZ E55 4-IN-1 ESC, XING2 2809 1250KV motors, pre-installed GPS, quick-release side panels, LED control module, front-mounted O4 Air Unit, and a fixed rear XT60 battery plug. This drone is designed for experienced FPV pilots who want a 7.5-inch long-range cinematic platform with reduced propeller view, strong 6S performance, and practical field maintenance. It is not a complete Ready-to-Fly set and still requires compatible goggles, radio controller, battery, charger, and setup checks before the first flight. Highlights Innovative H-Shaped Long-Range Frame DesignThe CineLR 7 uses an H-shaped frame layout designed to reduce propellers in view while keeping the platform suitable for smooth long-range flying and cinematic footage. This makes it a practical choice for pilots who want cleaner DJI O4 video from a 7.5-inch platform without moving to a full cinelifter or heavy X8 setup. 7.5-Inch Long-Range PlatformThe CineLR 7 is designed for efficient 7.5-inch cruising, cinematic long-range routes, mountain flying, coastal flying, and high-capacity battery setups. Compared with 5-inch FPV drones, the larger 7.5-inch platform can carry bigger batteries and is better suited for endurance-oriented flying, but it also requires more careful battery management, route planning, and wind awareness. Quick-Release Side PanelsThe quick-release side panels help protect internal electronics from debris and make maintenance easier. They also help keep the build cleaner by reducing exposed wiring and cable clutter, while still allowing access for inspection, repairs, and service work. DJI O4 Air Unit Pro – HD Recording and Digital FPVThe DJI O4 Air Unit Pro provides high-quality digital FPV video and onboard recording. With its 1/1.3-inch image sensor, 155° ultra-wide field of view, D-Log M support, RockSteady 3.0+ stabilization, 1080p/100fps live view, and up to 4K/120fps onboard recording capability, the O4 Air Unit Pro is well suited for cinematic long-range footage. Up to 25 Minutes Manufacturer-Stated Hover TimeThe manufacturer states up to approximately 25 minutes of hover time with a 21700 6S 8000mAh Li-Ion battery under iFlight laboratory conditions. High-Performance BLITZ F7 StackThe CineLR 7 uses a BLITZ F7 Flight Controller together with a BLITZ E55 4-IN-1 2–6S 55A ESC. The electronics system is designed for stable 6S operation, larger 7.5-inch propellers, and long-range flight requirements. The ESC offers up to 65A burst current according to manufacturer information. Built-In GPS ModuleThe CineLR 7 includes a pre-installed GPS module with protective TPU cover. GPS can support coordinates, telemetry, flight logging, and Betaflight GPS Rescue after correct configuration and testing by the pilot. Important: GPS Rescue is not enabled by default and must not be treated as a guaranteed return-to-home function. It must be configured, checked, and tested carefully before use. Fixed Rear XT60 Battery PlugThe rear-mounted fixed XT60 battery plug helps with cleaner cable routing and reduces the risk of battery leads reaching the propellers. This layout also supports better battery cable management on larger long-range battery setups. Front-Mounted DJI O4 Air UnitThe front-mounted Air Unit layout improves cooling access and keeps the DJI O4 Air Unit Pro easier to service. This helps support stable O4 operation during longer flights and makes SD card access more practical. LED Control ModuleThe CineLR 7 is equipped with a BLITZ LED Control Module. The LEDs are not configured through Betaflight. They can be adjusted directly through the LED control module buttons, depending on the installed configuration. BNF Factory Setup This drone is delivered as a BNF, which means Bind-and-Fly. It is assembled, factory configured, and tested before shipment. However, BNF does not mean Ready-to-Fly. The drone still needs to be bound to a compatible radio controller before the first flight. Before the first flight, check all screws, motor direction, propeller orientation, receiver binding, failsafe behavior, GPS status, video link, OSD, Betaflight modes, and voltage warning settings. ReadyFly Kits – Complete FPV Sets Available This product is sold as a BNF drone. BNF means Bind-and-Fly: the drone is assembled, tuned, and equipped with the selected receiver and DJI O4 video system, but it still needs to be bound to a compatible radio controller before flight. If you need a complete FPV setup, we also offer ReadyFly Kits or compatible accessory bundles in our shop. These make it easier to combine suitable goggles, radio controller, batteries, charger, propellers, and accessories. Choose this BNF drone if you already have compatible DJI O4 FPV equipment and a matching radio system. Choose a ReadyFly Kit or accessory bundle if you want a more complete FPV setup. Required to Fly This is a BNF drone, not a complete ReadyFly Kit. You also need: Compatible DJI FPV goggles Compatible radio controller matching the selected receiver version Suitable 6S battery 6S-compatible LiPo/Li-Ion balance charger microSD card for onboard recording, if required Not included with the BNF drone: Battery Charger FPV goggles Radio controller microSD card Action camera Choose the Correct Receiver Version Please choose the receiver version that matches your radio controller. Available receiver versions: For DJI FPV Controller 2 & 3 TBS Crossfire Diversity NANO RX iFlight ELRS 2.4GHz True Diversity RX iFlight ELRS 868/915MHz True Diversity RX iFlight ELRS 2.4GHz / 868 / 900MHz Dualband Diversity RX The DJI O4 Air Unit Pro is responsible for video transmission. The selected receiver/control version determines how the drone receives control commands from your radio controller. DJI Controller VersionChoose the DJI Controller version if you want to control the drone with DJI FPV Remote Controller 2 or DJI FPV Remote Controller 3. This version is configured for DJI SBUS control. The DJI Controller version does not have additional receiver antennas because the control signal is transmitted through the DJI O4 Air Unit Pro system and its O4 antennas. Important: The DJI Controller version is intended for DJI remote control use. If you want to use ELRS or TBS Crossfire later, a separate receiver must be installed and configured correctly. This may require wiring changes, disconnecting DJI SBUS, or using another UART. TBS Crossfire Diversity NANO RX VersionChoose this version if you use a TBS Crossfire radio system or a compatible Crossfire module and want the Crossfire Diversity receiver variant. This version uses two receiver antennas. ELRS True Diversity 2.4GHz VersionChoose this version if you use an ELRS 2.4GHz radio controller and want the True Diversity receiver variant. This version uses two shorter 2.4GHz receiver antennas. ELRS True Diversity 868/915MHz VersionChoose this version only if your radio controller or external module supports ELRS 868/915MHz and you want the True Diversity receiver variant. This version uses two longer 868/915MHz receiver antennas. ELRS 2.4GHz and ELRS 868/915MHz are not compatible with each other. ELRS Dualband Diversity VersionChoose the ELRS Dualband Diversity version only if your radio hardware and ELRS setup support the required dualband configuration. This version is designed for pilots who want one receiver system with dualband capability and diversity reception. Receiver Antenna Note All ELRS and Crossfire Diversity receiver versions use two receiver antennas. The DJI Controller version does not have separate receiver antennas because control is handled through the DJI O4 Air Unit Pro antennas. Product images are for display and reference only. Some images may be generic manufacturer photos and may not show the exact antenna layout or receiver antenna length of every available variant. If you are not sure which version matches your radio controller, please contact us before ordering. Product Images and Variant Notice Product images are for display and reference only. Some images may be generic manufacturer photos and may not show the exact antenna layout, receiver antenna length, battery mounting, GPS position, props, LED appearance, side-panel details, or small details of every available variant. The final configuration depends on the selected receiver version, production batch, and product variant. Battery Recommendations This drone is designed for 6S batteries and 7.5-inch long-range battery setups. Standard LiPo recommendation: 6S 3300–3500mAh LiPo This is the recommended starting range for a balanced mix of throttle response, manageable weight, stable handling, and practical flight time. Larger LiPo options: 6S 4000–6000mAh LiPo can be used depending on the desired flight time and use case, but larger LiPo batteries increase takeoff weight and reduce agility. Li-Ion / endurance cruising: 6S1P 5000mAh Li-Ion is the bare minimum Li-Ion option for this platform. It can be used for very smooth cruising only. For 7-inch and 7.5-inch long-range platforms, we recommend 6S2P Li-Ion batteries for better throttle response and reduced voltage sag. Recommended Li-Ion options: 6S2P 8000mAh Li-Ion for long-range endurance cruising 6S2P 10000mAh Li-Ion for maximum range and maximum endurance setups Important Li-Ion Note: Compared with 5-inch platforms, 7-inch and 7.5-inch drones draw more power and place higher load on the battery during climbs, wind correction, heavier payloads, and long-distance flights. A 6S1P Li-Ion pack can experience more voltage sag and weaker throttle response on this size of drone. For this reason, 6S2P Li-Ion packs are strongly recommended when using Li-Ion on the CineLR 7. Li-Ion batteries are suitable for smooth cruising and endurance-oriented flying. They are not suitable for aggressive freestyle, racing, repeated hard punch-outs, or high-current flying. Li-Ion batteries behave differently from LiPo batteries and may require adjusted Betaflight voltage warnings. Always configure warning and landing voltages according to the battery chemistry and pack used. Important Long-Range Battery Note: Large batteries can strongly change the handling of the drone. A heavier battery may increase cruising time but reduce agility, increase braking distance, increase motor load, and require more careful flight planning. Always keep sufficient battery reserve for return flight, wind, altitude changes, and unexpected route changes. Action Camera Support The CineLR 7 can carry a GoPro or similar action camera when a compatible TPU mount is used. Adding an action camera increases takeoff weight, changes flight behavior, increases current draw, and usually reduces flight time. For many long-range flights, the DJI O4 Air Unit Pro onboard recording may already be sufficient, reducing the need for an additional action camera. Recommended Accessories Default Propeller: HQ 7.5×3×3 Propellers Standard LiPo Battery: 6S 3300–3500mAh LiPo Minimum Li-Ion Battery: DOGCOM 6S1P 5000mAh Li-Ion Battery, smooth cruising only Recommended Li-Ion Battery: 6S2P 8000mAh Li-Ion Battery Maximum Range Li-Ion Battery: 6S2P 10000mAh Li-Ion Battery Charger: HOTA D6 Pro 650W 1–6S Dual Channel AC/DC Smart Charger GoPro Mount: Compatible CineLR 7 TPU action-camera mount TPU Parts: CineLR 7 TPU Parts ND Filters: iFlight O4 Air Unit Pro ND Filters Technical Specifications Product Name: CineLR 7 O4 6S HD BNF Product Type: 7.5-inch BNF long-range cinematic FPV drone Recommended Skill Level: Experienced FPV pilots Video System: DJI O4 Air Unit Pro Receiver Options: DJI FPV Controller 2 & 3, TBS Crossfire Diversity NANO RX, iFlight ELRS True Diversity RX variants, iFlight ELRS Dualband Diversity RX, depending on selected variant Geometry: H-shaped Frame Wheelbase: 334mm Flight Controller: BLITZ F7 Flight Controller ESC: BLITZ E55 4-IN-1 2–6S 55A ESC ESC Burst Current: up to 65A, manufacturer-stated Motor: XING2 2809 1250KV Propellers: HQ 7.5×3×3 Propellers Battery Input: 6S Battery Plug: XT60 Recommended Battery Type: 6S LiPo or 6S Li-Ion, depending on use case Recommended LiPo Battery: 6S 3300–3500mAh Recommended Li-Ion Battery: 6S2P 8000mAh / 10000mAh for long-range endurance cruising Minimum Li-Ion Battery: 6S1P 5000mAh for very smooth cruising only Dimensions: 323 × 269 × 45mm Weight: approx. 777g ±5g without battery Approx. Takeoff Weight: approx. 1628g ±5g with 21700 6S 8000mAh battery Maximum Speed: approx. 140km/h Maximum Takeoff Altitude: approx. 7000m Maximum Hover Time: approx. 18 minutes with 6S 3300mAh battery, manufacturer-stated value Maximum Hover Time: approx. 25 minutes with 6S 8000mAh battery, manufacturer-stated value Recommended Load: 800g, manufacturer-stated Operating Temperature Range: -20°C to 40°C Antennas: Dual DJI O4 antennas plus receiver antennas depending on selected receiver version GPS: Pre-installed GNSS Support: GPS + SBAS + Galileo + QZSS + GLONASS Important Note About Flight Time The manufacturer-stated hover time is measured under controlled laboratory conditions and should not be understood as normal long-range flight time in all conditions. Actual flight time depends on battery type, battery condition, throttle use, wind, altitude, temperature, payload, propellers, flight route, return reserve, and pilot style. DJI O4 Air Unit Pro Specifications Product Name: DJI O4 Air Unit Pro Image Sensor: 1/1.3-inch Lens Field of View: 155° ISO Range: 100–25600 Live View Resolution: 1080p/100fps H.265 Onboard Recording: up to 4K/120fps supported by DJI O4 Air Unit Pro Video Format: MP4 Maximum Video Bitrate: 130Mbps Color Mode: Normal / D-Log M Stabilization: RockSteady 3.0+ / stabilization off for Gyroflow use Live View Quality: 1080p at 100fps Operating Frequency: 5.170–5.250GHz and 5.725–5.850GHz, region dependent Transmitter Power: Region dependent Communication Bandwidth: max. 60MHz Antenna: Dual antennas Built-in Storage: 4GB Supported microSD Cards: up to 512GB Operating Temperature: -10°C to 40°C Air Unit Weight Including Camera Module: approx. 32g Transmission Module Dimensions: 33.5 × 33.5 × 13mm DJI O4 Compatibility Compatible with: DJI Goggles 3 DJI Goggles N3 DJI Goggles 2 DJI Goggles Integra DJI FPV Remote Controller 3, when using the DJI Controller version DJI FPV Remote Controller 2, when using the DJI Controller version Other radio controllers can be used only if they match the installed receiver version, for example ELRS or Crossfire. Video Transmission Range The maximum video transmission range depends on goggles, region, environment, antenna orientation, interference, terrain, and local regulations. Reference values with DJI Goggles 3 / DJI Goggles N3: FCC: up to 15km CE: up to 8km SRRC: up to 8km In Europe, CE limits apply. Do not treat the maximum transmission range as a guaranteed flight distance. Packing List 1× CineLR 7 O4 6S HD BNF 2× Antennas 1× Anti-Slip Battery Pad 2× 7.5-Inch Propeller Pairs 2× Battery Straps Setup Notes The drone is delivered with a factory-installed Betaflight preset. Before the first flight, no firmware update, no reset, and no Betaflight changes are required. BNF means the drone still needs to be bound to your compatible radio controller before flight. Check all screws, motor direction, propeller orientation, receiver binding, failsafe behavior, OSD, GPS status, video link, LED function, and voltage warning settings before the first flight. GPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use. For long-range flying, always verify GPS satellite lock, home point behavior, receiver range, video link quality, battery reserve, wind direction, return route, and local flight restrictions before takeoff. We strongly recommend not flashing firmware, not resetting Betaflight, and not applying random presets unless you have saved a backup and know exactly which target and configuration are required. Changelog January 18, 2025: Propellers changed from HQProp 7.5×3.7×3 to HQProp 7.5×3×3. March 11, 2025: The material of some TPU parts in the BNF version was changed to injection-molded parts. Important Note – GPS Rescue and Long-Range Flying GPS Rescue is a Betaflight safety feature that may help the drone return toward the home point after correct configuration. It is not a certified return-to-home system and must not be treated as a guarantee that the drone will return safely. Incorrect GPS Rescue settings, insufficient satellites, wrong failsafe setup, low battery, strong wind, pilot error, terrain, or RF signal loss can still lead to crashes or loss of the drone. Always test GPS Rescue carefully in a safe area before relying on it, and always keep enough battery reserve for the return flight. FAQ What does BNF mean?BNF means Bind-and-Fly. The drone is assembled and factory configured, but it still needs to be bound to your compatible radio controller before flight. Is this a complete Ready-to-Fly set?No. This is only the BNF drone. Battery, charger, FPV goggles, radio controller, microSD card, and action camera are not included. If you need a complete setup, please check our ReadyFly Kits or compatible accessory bundles. Which receiver version should I choose?Choose the version that matches your radio controller. Use DJI Controller version for DJI FPV Remote Controller 2 or 3. Use ELRS True Diversity 2.4GHz for suitable ELRS 2.4GHz radios. Use ELRS True Diversity 868/915MHz only for suitable ELRS 868/915MHz radios or modules. Use ELRS Dualband Diversity only if your radio hardware and ELRS setup support the required configuration. Use TBS Crossfire Diversity if you fly with Crossfire. Why does my receiver antenna layout look different from the product photos?Product photos are for display only and may not show every receiver version. DJI Controller versions do not have separate receiver antennas because control is handled through the DJI O4 Air Unit Pro antennas. All ELRS and Crossfire Diversity receiver versions use two receiver antennas. Receiver antenna length and layout depend on the selected receiver version and production batch. Is GPS included?Yes. The CineLR 7 O4 6S HD includes pre-installed GPS. Is GPS Rescue enabled by default?No. GPS Rescue is not enabled by default. It must be configured, checked, and tested by the pilot before use. Which battery should I use?For LiPo use, a 6S 3300–3500mAh LiPo is the recommended starting point. For maximum long-range cruising, we recommend 6S2P Li-Ion batteries such as 8000mAh or 10000mAh. Can I use a 6S1P 5000mAh Li-Ion battery?Yes, but it is the bare minimum Li-Ion option for the CineLR 7 and is recommended only for very smooth cruising. For better throttle response and less voltage sag on this 7.5-inch platform, we recommend 6S2P Li-Ion options such as 8000mAh or 10000mAh for maximum range. Can I use LiPo batteries?Yes. LiPo batteries are recommended when you want better throttle response and more dynamic flying. The standard LiPo recommendation is 6S 3300–3500mAh. Can I use Li-Ion batteries?Yes. Li-Ion batteries are suitable for smooth long-range cruising and endurance-oriented flying. For this 7.5-inch platform, 6S2P Li-Ion packs are recommended to reduce voltage sag and improve throttle response compared with smaller 6S1P packs. Can I use a GoPro or action camera?Yes. The frame can carry a GoPro or similar camera with a compatible TPU mount. Additional payload increases weight and usually reduces flight time. Is this drone suitable for beginners?No. This is a large 7.5-inch long-range FPV drone and is recommended for experienced pilots who understand GPS, failsafe setup, battery management, radio range, and local flight rules. Can I fly in rain or wet conditions?No. Do not fly in rain, snow, wet grass, fog, or high humidity. Damage caused by water or moisture is not considered a normal manufacturing defect. Safety Notice FPV drones are high-performance aircraft and must be operated responsibly. Always follow local laws and regulations. Remove the propellers before configuration, receiver testing, firmware work, or motor testing on the bench. Always inspect the drone before every flight. Do not fly with damaged propellers, loose screws, damaged antennas, damaged batteries, wet connectors, or visible electronic damage. For long-range flights, always plan the route, check weather and wind, verify GPS lock, keep sufficient battery reserve, and respect local airspace rules. Crash damage, water damage, corrosion, incorrect firmware flashing, wrong Betaflight configuration, incorrect wiring, incorrect receiver setup, incorrect battery use, unsafe operation, or loss due to poor long-range planning are not considered normal manufacturing defects. By purchasing and using this product, the user accepts responsibility for safe setup, safe operation, legal compliance, maintenance, flight planning, and risk management.
