Detailing Clay Bar — 200 g (Soft • Medium • Heavy) D-TAIL LAB Detailing Clay Bars lift bonded contamination that washing can’t touch — traffic film, bugs, resin, light overspray, iron residues — leaving paint smooth and ready for polishing or protection. Available in three grades (Soft, Medium, Heavy) to match the job and paint type. Why You'll Love It Real decon results — rapidly removes embedded grit for a glassy finish before correction/protection. 3 grades, one workflow — start Soft on sensitive paint; step up to Medium/Heavy where needed. Easy to handle — 200 g bar with good elasticity; stores in its protective box for reuse. Versatile surfaces — safe for painted and chrome surfaces when properly lubricated. Pairs Well With Iron remover (chemical decon first): PURGE — pH-Neutral Iron & Fallout Remover Wash solution (pre/post): FOMO — pH-Neutral Car Shampoo Synthetic alternative for maintenance: Synthetic Clay Towel 3.0 How To Use Pre-wash & wash: Rinse, then contact-wash with FOMO; rinse thoroughly. Chemical decon (recommended): Spray PURGE on cool panels, allow reaction, then rinse. Lubricate: Mist a small section generously with soapy water or SYNERGY rinseless wash. Clay: Flatten a piece of clay. Glide with light pressure in straight lines until the surface feels smooth. Fold to a clean face as it loads. Wipe & inspect: Buff residue with a clean microfiber and check under proper lighting. Protect: Optionally re-wash, then apply your chosen protection (sealant/coating/wax). Notes: Always test on an inconspicuous spot. Use the least aggressive grade that achieves the goal. Do not clay on dry paint or under direct sun/hot panels.
