HOST® Dry Extraction Cleaner is one of the most advanced dry carpet cleaning powders on the market today. HOST® Dry Extraction Cleaner contains a balanced blend of water and green cleaning chemistry with reduced VOCs. Made from natural, sponge-like cellulose fibres these microsponges have been moistened with just the right amount of cleaning ingredients to dissolve and remove dirt and grime from carpet fibres. Details: This dry carpet cleaning powder has been designed to attract and absorb dirt and soiling from all carpet types. Millions of tiny 'sponge' like granules have been enhanced with a specialised blend of cleaning agents to provide optimum cleaning power. As the low moisture HOST cleaner is brushed through the carpet, the micro-sponges deep-clean-extract by dissolving, trapping and removing spots, spills, sticky water soluble soil and greasy oily dirt. HOST cleaner holds and controls the cleaning liquids, so dissolved dirt doesn’t run into the carpet backing or grout/textured floor indents. After vacuuming up the HOST cleaner, flooring is clean, dry and back in service. HOST is natural, non-toxic, biodegradable and safer for people and pets. Benefits of Using Host! No downtime or need to close off sections of flooring With almost no drying time required using this product to clean and maintain carpets means that a carpet clean can be carried out at any time of day to include a full room clean through to small areas to tackle accidents and spillages as soon as they happen. No sticky residues or risk of water damage This dry carpet cleaning powder is packed with a controlled and precise amount of detergent to break down and remove a wide range of soils and odours without the need for excess water, rinsing or extracting. Controlled cleaning meaning all risks are eliminated A carpet cleaning solution that doesn't use litres of water and detergents means the risks associated with shrinking, colour-running, mildew and mould are eliminated. A dry carpet cleaning powder suitable for all carpets Host is suitable for use on all types of carpet including wool, sisal and coir and carry the Woolsafe and CleanSeal Approved mark. Host Dry Extraction cleaning kits have been independently tested and certified to meet the highest standards of performance, quality and safety. How To Use 1 Vacuum and pile lift carpet thoroughly or sweep flooring before applying HOST cleaner. The more carpet vacuuming you do, the better the results. 2 Apply HOST cleaner to the floor, about one handful size for each square yard (3′ x 3′). Do not apply more than 100 to 200 square feet at a time or the HOST cleaner could dry out and not clean as well. For the HOST Applicator, place HOST cleaner into the applicator and choose light, medium, or heavy setting. Then guide the HOST Applicator over the area to be cleaned. As it rolls, it dispenses the chosen amount of micro-sponges. 3 Work HOST into the soiled area using the suitable HOST equipment or brush, using brushing strokes in a north and south, east and west and then north and south direction. This brushing action distributes the HOST micro-sponges and brings them in contact with the dirty surfaces of what you are cleaning. 4 Remove damp or dry HOST from carpet or hard surface with HOST extractor or conventional vacuum. For hard surfaces one may need to follow up with a damp mop. NOTE: If an area requires more cleaning, repeat steps 2 and 3 or consider pretreating using a mist of PREP® or Spot Remover. Then apply more HOST and clean as before. Depending on the fiber and conditions you are cleaning, you may need to use HOST SJ and Spot Remover as the pre-mist. Refer to the HOST SJ cleaning tips as your guide.
