Hiddin's Clear Freestanding "Clear Front" Pet Gate is based on our love for a frameless glass fireplace screen.....a gate that offers an unobstructed clear front, and side panels that pivot to enclose your area. This gate is particularly good for barricading the bottom of stairways and for wider hallways. The 30" tall, acrylic pet gate has hinged, 18" wide panels in the front and 15" end panels that pivot and angle as needed. The end panels provide a barrier on the sides of the gate. The front panels are held straight by lucite clips placed between each panel. The clips are placed on top and bottom, securing the front to withstand pet jumping. Set includes:-the gate.-Separate lucite clips that go on top and bottom, between each front panel, to hold the front panels straight. Key Features -Flat front gate with an unobstructed view, inspired by a modern, glass fireplace screen.-No assembly, ready to use out of the box.-Perfect for barricading the bottom of stairways and wider hallways.-2 "wing" end panels pivot and enclose the sides of the gate.-Sizes: 4 panel is for 36-53" opening, 5 panel is for 54-71" opening, 6 panel is for 72-89" opening and 7 panel is for 90-105" opening.-Can be used inside or outside.-Folds flat for easy storage and fits under couch or bed. Size & Capacity Dimensions when gate is set up:4-Panel: 36"w x 30"h x 15"d(approximate weight 25 lbs.)5-Panel: 54"w x 30"h x 15"d(approximate weight 39 lbs.)6-Panel: 72"w x 30"h x 15"d(approximate weight 53 lbs.)7-Panel: 90"w x 30"h x 15"d(approximate weight 67 lbs.)Front panels are 18"w x 30"h x .25"dSide/wing panels are 15"w x 30"h x .25"dNote: 1/4" to 1/2" tolerance is possible with dimensions and is not considered defective. Use & Care Proper Handling:-Before transporting the gate, ensure to close the end panels, so gate is condensed. Carry the gate using the laser cut, integrated handles.-Do not transport the gate when the panels are extended. Care Instructions:-Acrylic panels must be hand washed only.-Do not use chemical cleaners on acrylic.-NOT TO BE USED AS A CHILD GATE. Assembly Instructions 1. Take the pre-assembled gate out of the the box and stand it up where you want it placed.2. Take the U shaped, separate clips and place them between each front panel, to hold the panels perfectly straight. The clips go on the top and bottom of the gate, covering the split between each front panel. Proper Handling:-Before transporting the gate, ensure to close the end panels, so gate is condensed. Carry the gate using the laser cut, integrated handles.-Do not transport the gate when the panels are extended.
