Our Most Popular SealantPlastic Cartridges with Screw-On Nozzles10 Year Limited Warranty This is our most popular sealant! High quality sealant that delivers the performance you demand at a competitive price. It is a one component, room temperature curing, acetic cure, 100% silicone elastomer that does not require the addition of activators, stabilizers, or catalysts to achieve optimum performance. Designed for joining and sealing most non-porous building materials including a variety of structural materials: glass, aluminum, stainless steel, wood, and plastics. All surfaces must be properly cleaned and the sealant tooled for good adhesion. Primer may be required for these and other substrates as well. It has a wide operating temperature range of -80° to 400°F, and can be applied at outdoor temperatures as low as -35° to 140°F. Strong physical properties: 350 psi tensile strength; 120 psi lap shear at 1/8" thickness and tear strength of 25 ppi. It will seal curtainwall joints, steel and aluminum windows, and skylights. Indoor uses include bathtubs, showers, and sanitary installations (mildew resistant clear contains a fungicide for cured beads that are mildew resistant). Comparable Sealants - Dow Corning®: 999-A; 786; 732; 700; Glazing Silicone; General Purpose; Commercial Grade 100%; Tub, Tile and Ceramic, HVAC/R.Dap: 100% Silicone.GE®: 1200 Construction, 1000 Contractors, 1700 Sanitary. Tremco®: Proglaze, Tremsil 200, TremPro 644. OSI: HM-270. Pecora: 860, 863. Sika®: SikaSil® GP. Sonneborn: OmniPlus. Technical Data - Meets or Exceeds Federal Specifications:TT-S-001543A (COM-NBS) Class A, for Silicone Building SealantsTT-S-00230C (COM-NBS) Class A, for One-Component Building SealantsASTM C-920 for Elastomer Joint Sealants, Type S, Grade NS, Class 25, Use NT, G, ACAN/CGSB 19.13-M87. CRL 33S Meets the Requirements of FDA Regulation Number 21 CFR 177.2600 for Use in Food-Related Applications, Such as Walk-in Freezers and Refrigerated Trucks. Certified by NSF to Standard 51 - Plastic Materials and Components Used in Food Equipment. "UL Recognized Component." Meets California Air Resources Board 2003 Requirements for Volatile Organic Compound (VOC) Content. Qualifies for LEED® (Leadership in Energy and Environmental Design) Green Building Rating System Credit. NOTE:This silicone is and will remain clear if properly stored in a cool dry place and away from direct sunlight. When uncured silicone is exposed to UV radiation (sunlight) it turns pinkish until it cures, it is the exposure to UV that causes the pink hue. Once cured, 24-48 hrs., the pink hue disappears completely Product Warning: Not recommended for structural glazing or insulating glass glazing, concrete and stone expansion joints, horizontal decks, patios, driveway or terrace joints where abrasion is possible. Not recommended for surfaces with special protective or cosmetic coatings such as mirrors, reflective glass, polyethylene or polypropylene surfaces. Not recommended for use on concrete, marble, limestone, lead coated, copper & brass surfaces, submerged joints (swimming pools), plazas, decks, pavements, etc. Remove all old sealant before applying new. Not suitable for painting. Check cartridge label and Specification Data Sheet for additional limitations.
