Model 140 center Model 140 center has three rooms. A large room in the middle and two small rooms on each side. You can use the full width in the large as a Soundbar solution or you can use the furniture as three departments for other products. The furniture has four back plates. A room can be open or fitted with a fabric or wooden door. The door opens downwards in the large room and to the left or right in the small rooms. You can fit one drawer in the small rooms. It’s not possible to fit drawers in the large room. Model 140 center has one cable hole center in the top plate and one cable hole in the bottom of the furniture Model 140 center can also be ordered with extra cable holes – or without cable holes – in the top plate. The back plates are fitted 5 cm. from the back of the furniture. They are fitted with magnets and are removablev The back plates has cable holes, but can also be ordered without. Outer measurements:- H: 205mm W: 2020mm D: 375mm *Measurements when using the big room as a Soundbar/Center solution Inner measurements pr. open room:- H: 162mm W: 482mm W: 980mm* D: 314mm D: 217mm* Without back plate D: 363mm Inner measurements pr. room with door H: 162mm W: 482mm W: 980mm* D: 298mm D: 201mm* Without back plate D: 347mm Finish:- All clic models, wood doors and drawers are available in the following paint and veneer quality’s: White, black, grey and light grey paint, Oak and walnut veneer Fabric doors are available in 2 series and a total of 16 colours. Melange: coal, concrete, frost, coffee and latte. Basic: dusty blue, grey, dark blue, olivegreen, brown, beige, white, silver, black, bordeaux and red. A polyurethane paint is used on all items. This type of paint is both hard wearing and colorfast. After the furniture is assembled, it is painted by hand for a perfect finish and sharp edges. Quality:- All design, development and production of the clic furniture is based in Denmark and all their furniture is made by hand. All materials are sourced in Denmark and are handpicked by their subcontractors. When they produce clic furniture, they use a special technique that allows a stable frame without the use of a fixed back panel. Their furniture is constructed to provide optimal strength and to hold a high amount of weight regardless if you place them on the floor on stands or mount them on the wall. All their furniture undergoes a thoroughly quality check before they leave our production.
