Model 240S right Model 240S right has two rooms. A large room on the left side and a small room on the right side. All rooms holds one shelf and one back plate. You can use the large room as a Soundbar solution or you can use the rooms in the furniture as single departments for other products. A room can be open or fitted with a fabric or wooden door. The door opens downwards in the large room and to the left or right in the small room. Model 240S right can also be fitted with two drawers in the small room. It’s not possible to fit drawers in the large room. Model 240S right has one cable hole center in the top plate and one cable hole in the bottom of the furniture Model 240S right can also be ordered with extra cable holes – or without – in the top plate. The back plates are fitted 5 cm. from the back of the furniture. They are fitted with magnets and are removable The back plates has cable holes, but can also be ordered without. The shelves can be placed in three different positions and extra shelves can be ordered The shelves are 16 mm thick Outer measurements:- H: 366mm W: 2020mm D: 375mm *Measurements when using the top shelf in the big room in model 240S right as a Soundbar solution Inner measurements pr. open room:- H: 322mm/162mm* W: 1478mm*/W: 482mm D: 314mm Without back plate D: 363mm Inner measurements pr. room with door:- H: 322mm/162mm* W: 1478mm*/W: 482mm D: 298mm Without back plate D: 347mm Finish:- All clic models, wood doors and drawers are available in the following paint and veneer quality’s: White, black, grey and light grey paint, Oak and walnut veneer Fabric doors are available in 2 series and a total of 16 colours. Melange: coal, concrete, frost, coffee and latte. Basic: dusty blue, grey, dark blue, olivegreen, brown, beige, white, silver, black, bordeaux and red. A polyurethane paint is used on all items. This type of paint is both hard wearing and colorfast. After the furniture is assembled, it is painted by hand for a perfect finish and sharp edges. Quality:- All design, development and production of the clic furniture is based in Denmark and all their furniture is made by hand. All materials are sourced in Denmark and are handpicked by their subcontractors. When they produce clic furniture, they use a special technique that allows a stable frame without the use of a fixed back panel. Their furniture is constructed to provide optimal strength and to hold a high amount of weight regardless if you place them on the floor on stands or mount them on the wall. All their furniture undergoes a thoroughly quality check before they leave our production.
