Upgrade your Late 99-03 7.3L Ford Powerstroke fuel system with our 4-line-feed fuel-line kit designed to eliminate many of the infamous leaks with the the stock fuel bowl. This kit works great from stock injectors to how ever large you want to run. There are quite a few other shops that build quality fuel pump/filter/regulator kits that will work great with this fuel line kit. All you need is some 1/2 inch 100psi minimum fuel rated hose/line from the customer supplied pump assembly up to the fuel distribution block, and your good to go. You can also build your own pump setup if you like. We recommend using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition trucks running 300cc or larger, and we also recommend using Fuelab adjustable regulators. For a more plug-n-play type fuel pump/filter setup we recommend the AirDog II 5G Fuel Pump as it has the filters and regulator built in, a lifetime warranty (as long as you turn in your receipt within 30 days of purchase), and is simple to install as all the legwork for finding fittings/adapters comes with the AirDog kit. The only thing you need to do with the AirDog II 5G is to cut off the mini fuse tap wire that is meant for the 99 and newer trucks to an ATO (regular) fuse tap for key-on power to send power to the supplied relay, and install the pump as directed by AirDog. Is Recommended That You Use Loctite 545 On The Pipe Threaded Fittings During Install Or Gas (Ng Or Propane) Rated Teflon Base Paste. Or If You Are Very Careful, You Can Use Teflon Tape As Long As It Is Rated For Gas Also. Details: Late 99-03 Ford Powerstroke 7.3 Liter Meant for installation with factory or aftermarket drop-in style turbos Upgraded with aerospace/military grade high flow Genuine Parker Ferulok fittings Eliminates many leak points with the stock factory fuel pump and fuel bowl Base plate and distribution manifold are pre-assembled for easier installation High quality billet T-6061 aluminum All lines are made of mandrel bent 304 Sandvik Coromat seamless stainless steel tubing Every single kit is test fit during production to ensure perfect fitment Comes with all necessary fittings, o-rings for turbo pedestal, and bolts, for a complete install. Test port to measure/set fuel pressure 1/2 inch AN (-08) inlet for plenty of volume of fuel for unlimited size injectors Lines are bent in the U.S.A. right here in our shop on our state of the art 3 axis CNC tubing bender for a perfect fit every time Note: The High Pressure Oil lines in the picture do not come with the kit. Those are sold separately. It Is Critical You Do Not Get Any Tape Into The Fuel System During Install
