NEW: Nickel-plated copper adapter High thermal conductivity copper Low-friction nickel plating Almost step-less design with 2mm hex for optimal extrusion performance Improved design for hot-tightening 2 mm hex key included Use any standard length V6 nozzle on a printer with volcano hotend Specially designed to be used together with Bondtechs CHT nozzle to improve the flow performance of your volcano hotend Usable up to 400°C Suitable for all materials, even abrasive ones (CF, wood, glow in the dark) Intended use This nickel-plated copper adapter enables the installation of any standard length V6 nozzle into a Volcano heater block by compensating for the 8.5 mm length discrepancy between standard and Volcano nozzles. It removes the need for multiple nozzle types, allowing all standard nozzles to be compatible with a Volcano heater block. Installation Guide Stick the adapter onto a 2.0 mm Straight Hex Key and carefully screw it into the HOT heater block from the bottom. The temperature should be at least your usual printing temperature. Please don’t use a Ball End Hex Key because that can strip the hex in the adapter. Tighten it carefully to around 0.5 – 1.0 Nm. Install your standard length V6 nozzle as usual. Make sure there is a small gap between the nozzle and the heater block. This ensures that you tightened the nozzle against the adapter and not the heater block. Otherwise, plastic might leak through the threads. Credits: This adapter is based on an idea from Nitram who is the father of the VolcoMosq heater block! Product History/Changes: Note: Order after 9th April 2025 will be shipping version 3.
Related
Related
Related
Related