COBAGrip anti-slip GRP floor sheets for slippery floors, ramps and walkways COBAGrip 5mm GRP floor sheets are a heavy-duty anti-slip covering for internal and external floors. Each sheet has a UV-stabilised, hard-wearing silicone carbide surface and simply bonds or screws onto the existing floor, so a worn or slippery surface can be refurbished without digging it up. The sheets are slip tested to DIN 51130 (R13) and BS 7976-2 (low slip potential), and fire tested to DIN 13501 with a Bfl-s1 classification. Key features R13 slip rating - tested to DIN 51130, with low slip potential to BS 7976-2. Fire tested - DIN 13501 Bfl-s1, EN ISO 11925-2:2020 and EN ISO 9239-1:2010. Hard-wearing surface - UV-stabilised silicone carbide, made for heavy-duty use indoors and out. Simple installation - bond or screw the sheets straight onto the existing floor. Wide operating range - performs from -50°C to +90°C. Equality Act colours - black, grey and yellow options meet colour-contrast requirements. Where it is used Walkways, ramps and access routes Worn or slippery stairs and landings Industrial units, warehouses and loading areas Construction and utilities sites Public buildings such as schools and hospitals Sizes and colours Sheets come in three sizes - 0.8m x 1.2m, 1.2m x 1.2m and 1.2m x 2.4m - all 5mm thick, in black, grey or yellow. A 3mm version is also available for lighter-duty areas. Specification Specification Detail Thickness 5mm Sheet sizes 0.8m x 1.2m / 1.2m x 1.2m / 1.2m x 2.4m Colours Black, grey or yellow Material GRP with silicone carbide surface Environment Indoor and outdoor Installation Bond or screw to the existing surface Operating temperature -50°C to +90°C Slip tested to DIN 51130 - R13 and BS 7976-2 - low slip potential Fire tested to DIN 13501 Bfl-s1, EN ISO 11925-2:2020, EN ISO 9239-1:2010 Fixing Sheets can be bonded with GRP fixing glue or screwed down, depending on the surface underneath. Stair nosing and stair tread covers from the same COBAGrip range are available where steps need the same treatment.