Cobble Coat®is a clear, solvent-based sealer designed to protect and beautify concrete brick pavers, natural stone, concrete surfaces, and Texture Deck. Providing an enhanced, wet look appearance and semi-gloss finish, Cobble Coat is made from 100% acrylic resins and is higher in solids than most conventional concrete sealers. Cobble Coat provides water and UV light resistance with unusually good adhesion to a variety of substrates. Each gallon of Cobble Coat will cover approximately 200 square feet per coat; the 5-gallon container of Cobble Coat will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width, and method of application. The second coat will take slightly less product. Try before you apply — Shop samples now. Product Features Wet look Years of protection against the sun and water damage Helps prevent the color of pavers from fading Non-yellowing Helps stabilize joints between pavers Helps minimize mold and algae growth. Inhibits weeds and anthills. Applications Clear sealer for application to concrete and brick surfaces Acrylic sealer for concrete, brick pavers, interlocking pavers, and other surfaces One of the best paver sealers and stain protectants Directions Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed. Concrete should cure a minimum of 28 days before sealing. Interlocking brick does not require etching. Cobble™ Clean and Cobble™ Prep may be used for specific cleaning situations. Two thin coats provide the best results. Do not apply Cobble Coat more frequently than every 18 months to avoid the buildup of the sealer. DO NOT thin material. Future applications should be applied in only one thin coat. COBBLE COAT IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE. READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT. Resources Technical Data Sheet (English) Technical Data Sheet (Spanish) SDS Sheet (English) Product Sell Sheet
Related
Related
Related