Cobble Coat® H2O - Water-Based Natural Look Concrete Sealer

Surfacelogix Verified independent store

→

Cobble Coat® H2O is a low-VOC, clear water based, film-forming sealer that can be used to protect and beautify concrete brick pavers, concrete surfaces and our Texture Deck System. Cobble Coat H2O may also be used over travertine, natural stone and most porous surfaces as it has excellent water resistance and marking resistance. Providing a natural look appearance and semi-gloss finish, Cobble Coat H2O is an excellent topcoat over our Colorcrete solid color sealer and our TD One Step System, where added UV and wear protection are needed without wet look enhancement. Each gallon of Cobble Coat H2O will cover approximately 200 square feet per coat; the 5 gallon container of Cobble Coat H2O will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width and method of application. Second coat will take slightly less product.On Bare Surface: One and sometimes two thin coats (2 dry mils) provide the best results on uncoated surfaces.Previously Sealed: One coat is recommended. Do not apply Cobble Coat H2O more frequently than every 18 months to avoid a build up of sealer. Product Features Eco friendly and low VOC Helps stabilize joints between pavers Helps minimize mold and algae growth Inhibits weeds and anthills Leaves natural look with a satin finish Enhances but doesn’t darken paver Applications Protects concrete, brick, marble, and porous stone substrates Top coating to previous coatings of Colorcrete and TD One Step Concrete floor coatings Directions Surfaces must be clean and dry before sealing. All grease, oil, and potential contaminants must be removed. Cobble™ Clean and Cobble™ Prep may be used for specific cleaning situations. Concrete should cure a minimum of 28 days before sealing. Interlocking brick does not require etching. Two thin coats provide the best results. Do not apply Cobble Coat H2O more frequently than every 18 months to avoid buildup of the sealer. COBBLE COAT H2O IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE. READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT. Resources Technical Data Sheet (English) Technical Data Sheet (Spanish) SDS Sheet (English) Product Sell Sheet Show more