Coil Spring Bundle [4WD Syncro Vanagon]

Piston Twistin LLC Verified independent store

→

This is a complete GoWesty-designed dual-rate coil spring set for your 4WD (Syncro) Vanagon. These springs are an exclusive GoWesty design. They are made right here in America by a leading automotive spring manufacturer that supplies many aftermarket companies. They feature an ultra-modern, hot wound (just like the OEM springs), dual-rate design based on the manufacturer's knowledge and our personal R&D over the past decade. They may look unusual, but they work. For the complete story on these springs, and a thorough explanation as to why they are the way to go, click here. For an informative response to the oft-asked question, "If I add lifting springs, do I have to install a longer shock?" click here. Options—Now you have a decision to make: Do you choose the ZERO lift springs, or the 2" lift springs? Please read this section carefully! ZERO LIFT: These are designed as a direct replacement for all 1986-91 Vanagon 4WD (Syncro) Westfalia campers, and will maintain your factory ride height. If you have the much lighter hard-top Vanagon (or single/double cab truck), you will see a slight suspension lift of up to 1.5". If you have an engine conversion that has a different weight or weight distribution—something other than the Vanagon waterboxer engine—your Vanagon may not sit level. These springs are not designed to compensate for Vanagons with engine conversions that are heavier than the original waterboxer. If you need additional leveling, we offer 1/2" spring pads for the rear coils. This spring set DOES NOT INCLUDE our billet aluminum Upper Ball Joint Spacer Kit.2" LIFT: These springs will provide roughly a 2" suspension lift for all 1986-91 Vanagon 4WD (Syncro) Westfalia campers. If you have the much lighter hard-top Vanagon (or single/double cab truck), these springs will provide too much lift for your suspension geometry. Don't say we didn't warn you! If you have an engine conversion that has a different weight or weight distribution—something other than the Vanagon water-boxer engine—your Vanagon may not sit level. These springs are NOT designed to compensate for Vanagons with engine conversions. If you need additional leveling, we offer spring pads. DO NOT USE 2" FRONT SPRINGS WITH FOX SHOCKS. This lifting spring set requires either our our billet aluminum Upper Ball Joint Spacer Kit or our Long-Pin Adjustable Upper Ball Joints for correct suspension geometry.Fox Shocks: If you already have Fox Shocks, or intend to purchase and install Fox Shocks, please select the option in the drop-down menu for Fox Shocks. You will receive ZERO lift front springs, and 2" lift rear springs. Due to the fully adjustable ride-height design of the front Fox shocks, we only recommend zero lift front coils for maximum range of adjustability and front CV axle shaft clearance. If you would like to run our Fox shocks, but do not want to lift your van, this is perfectly fine. Simply select ZERO LIFT in the drop-down menu. This spring set DOES NOT INCLUDE our billet aluminum Upper Ball Joint Spacer Kit. Warranty Limited Lifetime Warranty: • These springs are guaranteed never to sag, period. • If even one of these springs sags or becomes defective in any way, we will replace the entire set or refund your money. • If the returned spring(s) is/are determined to be defective, we will also reimburse you for the initial installation labor. We will also pay for the spring(s) to be returned to the manufacturer for thorough testing to determine what happened and why. Installation & Fitment Notes INSTALLATION NOTES: Does not require special tools to install. However, the installation of these springs is very difficult, even with a car hoist and all the correct tools. and requires a 4-wheel alignment after installation. GoWesty recommends that a professional shop with alignment tools install these springs. DO NOT USE 2" FRONT SPRINGS WITH FOX SHOCKS.ADDITIONAL NOTES FOR LIFTING SPRINGS: If you have installed lifting springs (as opposed to our zero-lift springs), you must also install our Upper Ball Joint Spacer Kit or our Long-Pin Adjustable Upper Ball Joints and will need to have the front end re-aligned. It is important to note that our lifting springs will raise your Vanagon to its suspension limit—which means these springs are designed to get your vehicle as high as possible while still maintaining proper alignment specs. Please read this article for tips on correctly aligning your vehicle! Satisfaction Guarantee 60 Day Satisfaction Guarantee: We are confident that you will love these springs. If you do not love the way they feel, you are free to return them anytime within the first 60 days for a 100% refund. Shipping & installation labor excluded. Spring Specs Show more