The Macabre Solutions Battery Loadable Optimized Counterweight Kit (BLOCK) provides a scalable, secure, and low-profile way to attach any NVG battery pack or counterweight pouch to a helmet. Made in Canada by Macabre Solutions with thermo-plastic composite and laser cut laminate Cordura, the BLOCK features: Fully adjustable design optimized for the 31A Strobe / PVS-31A / BNVD-1531 battery packs but also fits any size battery pack or counterweight pouch and allow users to cinch the contents to the helmet tightly Clever design that removes unnecessary bulk and minimizes snag hazards Active retention that attaches to most helmets on the market via helmet bolts (Ops-Core style helmets) or looped through accessory rails (Team Wendy) 2x Removable elastic loops that accepts ChemLights Cable Management via included shock cords Loop Velcro on the rear for patches Structure At the heart of the BLOCK is a sheet of custom-cut thermo-plastic composite that attaches to the helmet via hook Velcro and provides rigid structure to the entire system. The composite sheet has loop Velcro to accommodate hook-backed battery packs or our optional Weight Plates. Adjustability The BLOCK features two vertical, length-adjustable, Velcro-backed Cordura laminate flaps that can be resized. The adjustable ends of the flaps are not sewn into the body but are hidden behind the composite backing plate, allowing users to expand the BLOCK to fit both a battery pack and optional Weight Plates, maintaining a clean, perfectly positioned 3.5x2" area for rear ID patches, and allowing the user to run the perfect amount of counterweight to balance their NVGs on the helmet. The sides are left open to accommodate for wider battery packs like the GPNVG-18. The top flap can be easily opened for battery changes. Security The BLOCK can be attached with active retention to a helmet by threading shock cord through the flaps and backing plate, and through the two small Cordura laminate tabs (included). The laminate tabs are installed into the helmet via the rear helmet bolts. For helmets without easily-accessible or no rear helmet bolts, the shock cord can be simply looped through the helmet accessory rails. Users can either create a fixed-length shock cord loop by knotting and hiding the knots inside each flap (great for users who don't need to service the counterweight often); or use the included cord-locks for a more adjustable option (ideal for users who require repeated access to a battery pack). Accessory Loops Two elastic loops sized for ChemLights or batteries are included and can be inserted into slots on the thermoplastic backing plate at the 12, 3, 6, and 9 o'clock positions. Scalable Most night vision goggles require more counterweight in the rear of the helmet than just a battery pack. Using our optional Weight Plates, users can add supplementary weight to the rear of the helmet in increments of ~215grams. The Weight Plates tuck in discreetly and securely behind most battery packs and are sized for the USBP. Weight Plate Guide From our experience the following weights are recommended: PVS-14 or Tanto Monocular - 2x Weight Plates Polymer binoculars - 3x Weight Plates; or 1 battery pack and 2 weight plates Metal Binoculars - 4x Weight Plates; or 1 battery pack and 3 weight plates Install Guide:Check out our video guide below for quick install and the features of the BLOCKFor Team Wendy users, check out this short below to get it to fit your helmet
