Summary A compact rainproof chiller built to cool your plunge setup. You get steady temperatures in the low- to mid-40s with simple installation for home use. Overview The unit delivers 7,500 BTU/hr of cooling with a ¾ HP compressor and a built-in circulation pump. It runs on a standard 110–120 V circuit and holds noise near 65 dBA. The housing resists rain but not freezing conditions. Size stays compact at 17 × 15 × 13 in with a weight of 49 lb. Each unit is built in Tennessee and covered by a 1-year limited warranty. Set Components ¾ HP chiller with pump Inline screen filter Quick-connect fittings User manual and warranty Compatibility Works with most plunge tubs and containers. Tub sold separately. Confirm tubing size and flow direction before setup. Installation Place the unit below the tub waterline Install tubing and fittings between tub and chiller Fill the tub and confirm flow Plug into a GFCI-protected outlet Set your target temperature Check water temperature with a thermometer Operation and Maintenance Rinse the inline screen filter on schedule Inspect tubing for kinks or leaks Keep vents open for airflow Store indoors before freezing conditions Use a dedicated GFCI circuit for safety Capacity Notes Cooling performance depends on water volume, room temperature, and insulation. Specifications Cooling Capacity: 7,500 BTU/hr Compressor: ¾ HP Voltage: 110–120 V / 3.9 A Size: 17 × 15 × 13 in Weight: 49 lb Noise: 65 dBA Temp Range: low- to mid-40 °F Pump: built-in circulation pump (not self-priming) Weather Rating: rainproof only Warranty: 1-year limited warranty Made in Tennessee Features & Benefits Features Deliver 7,500 BTU/hr cooling with a ¾ HP compressor Hold water in the low- to mid-40s Move water with a built-in pump Filter debris with an inline screen Use quick-connect fittings for faster setup Run on a standard 110–120 V circuit Handle rain exposure with a weather-resistant shell Benefits Support recovery with cold immersion Set up a home plunge with a compact footprint Keep flow steady with internal pumping Protect the system with simple filtration Install with basic tubing and quick fittings Disclaimer This unit delivers cold immersion temperatures that pose risks including cold shock, hypothermia, cardiac arrest, and drowning. Consult a clinician before use. Never use alone. Always verify water temperature with a thermometer. Follow all manual instructions and use a GFCI-protected outlet.
