A Floodlight That Covers the Whole Approach The Collingwood FL02 is a 20W LED floodlight built for the parts of a building that need one fitting to do a big job. Point it at an entrance, a courtyard, or a stretch of facade and its 120 degree beam spreads the light wide instead of leaving dark patches at the edges. Black Cast Aluminium, Built to Take a Knock This version has a black painted cast aluminium body. The finish is plain and utilitarian rather than decorative, which suits its job on an exterior wall more than it would in a living space. It carries an IP65 rating, so dust and rain are sealed out, along with an IK07 rating for resistance to knocks and impacts, useful anywhere the fitting might get brushed against or hit by debris. How It Works A switch on the back of the unit lets you choose between 3000K, 4000K, and 6500K, so you can settle on a warm, neutral, or cool white once it's actually up on the wall rather than guessing beforehand. The head rotates a full 360 degrees and tilts 180 degrees, so once the bracket is fixed in place you can still aim the beam precisely. It's wired directly to mains power as a Class I fitting, with the LED driver built in, so there's no separate driver unit to find room for. It isn't dimmable, and the LED itself isn't a user replaceable part. Where It Works Best This is an outdoor fitting through and through. It suits driveways, garden boundaries, courtyards, and the approach to a front or back door, anywhere a single wide beam is more useful than several small ones. The sealed body and impact rating also make it a sensible choice for exposed spots such as coastal properties or walls that catch the worst of the weather. Collingwood Lighting Collingwood Lighting designs and manufactures its LED products from Sywell in Northamptonshire, and has specialised in LED technology since 2002. The brand says it was among the first to bring fire rated, fully waterproof, sealed for life LED products to the UK electrical wholesale market, and fittings like the FL02 carry that sealed, built to last approach into an everyday floodlight. Collingwood has also been awarded a Gold medal by EcoVadis, placing it among the top 5% of companies assessed globally for sustainability. Good to Know Rated IP65 and IK07, sealed against dust and rain and resistant to knocks, suited to entrances, facades, and other exposed exterior walls Wired directly to mains as a Class I fitting, with no separate driver required Moonlight Design recommends installation by a registered NICEIC electrician Not dimmable Colour switchable between 3000K, 4000K, and 6500K via a switch on the back of the unit Covered by a 5 year warranty, or 3 years on the PIR sensor version of this range Measures 230mm height x 150mm length x 30mm depth, and weighs 0.6kg Questions People Ask Can I change the colour temperature after it's installed? Yes. There's a switch on the back of the unit that lets you pick 3000K, 4000K, or 6500K once it's mounted, so you're not locked into one colour before it goes up. Is this floodlight dimmable? No, this model isn't dimmable. Does it need a separate driver? No. It's wired directly to mains and the LED driver is built into the fitting, so there's nothing extra to install. Can I adjust the angle once it's mounted on the wall? Yes. The head rotates a full 360 degrees and tilts 180 degrees, so you can aim the beam precisely after fixing the bracket in place. Is there a version with a motion sensor? This listing is the standard FL02 without a sensor. The range also includes a PIR sensor version, which carries a 3 year warranty rather than the standard 5 years.
Related
Related
Related
Related