Collinite No. 100 Beadcoat Ceramic Sealant Featuring an SiO2+ graphene structure, this easy to use sealant provides ultra durable hydrophobics and a high gloss, super slick finish to variety of automotive exterior surfaces Sio2 + Graphene Paint Protectant No.100 Beadcoat SiO2 + Graphene Spray Sealant quickly provides ultra-durable hydrophobics + a high gloss, super slick finish to a variety of automotive exterior surfaces. Featuring a functional ceramic-graphene resin structure, this easy-to-use formula provides 6+ months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim. Directions: Shake well before each use. For best results, only apply product to clean/decontaminated (clayed and/or polished if necessary) surfaces using a microfiber pad or microfiber towel folded into 1/4's. Use a 2nd (dry) microfiber towel for removal. If by PAD: First, spray pad twice with product to moisten/prime. Next, apply 2-3 sprays of Beadcoat directly onto a 3 x 3 ft panel. Spready evenly in a cross hatch, uniform pattern. Immediately remove with dry, clean microfiber towel. Flip removal towel and change as necessary to avoid streaks. Avoid applying to hot surfaces. After removal- for optimal bond/protection- allow at least 24 hour cure time before introducing water to surface. As lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.
