Available as DISS or Ohmeda Diamond compatible. Outlets shall be manufactured with a 7-3/4" (197 mm) length type ?K? 1/2" (12.7 mm) outside diameter (3/8" [9.5 mm] nominal) size copper inlet pipe stub which is silver brazedto the outlet body. The body shall be of 1-5/16" (33 mm) diameter, one piece brass construction. For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi (1,379 kPa) in the event the primary check valve is removed for maintenance. Outletbodies shall be gas specific by indexing each gas service to a gas specific pin indexing arrangement on the respective identification module. A color coded front shall be used for ease of gas identification and aesthetic appeal. With the back rough-in mounted, the outlet shall adjust up to 3/4" (19 mm) variation in mounting plate thickness. All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested. Amico products comply with NFPA 99.
