The Compact Honey Pump is HillCo's smaller-footprint transfer pump — built around the same pump, gearbox, and motor from the Speed-Fill XL and Plus machines, adapted into a standalone honey pump. If the full HillCo Honey Pump is more than your setup needs, this is the right alternative. It pumps at ~2 GPM at 70°F, lifts at least 20 ft vertically, and handles honey from 60 to 120°F without issue. Forward/reverse operation lets you clear the line when you're done. Key Features 1/8 HP DC Motor with Variable Speed — Dial in your flow rate. Slower than the full HillCo Honey Pump but right-sized for smaller honey house setups and shorter transfer runs. Helical Gearbox, All-Steel Gears — Smooth, durable gearing. Food-grade nylon gears contact the honey directly. Forward/Reverse Operation — Reverse to clear the hose at the end of a transfer run. Works 60–120°F — Wide temperature range. Handles both thicker cold honey and warm liquid honey without stalling. ~2 GPM at 70°F — Moves a 5-gallon bucket worth of honey in about 2.5 minutes at full speed. At Least 20 ft Vertical Lift — Tested at 70°F. More than enough for standard honey house tank heights. Uses 1.5" Hose — Order the 1.5" Honey Pump Hose separately. Not compatible with Speed-Fill hose. 3-Year Warranty — All components covered. Product Details Motor 1/8 HP DC, variable speed Gearbox Helical, all-steel gears Honey Contact Food-grade nylon gears Operation Forward / reverse Honey Temp Range 60–120°F Flow Rate ~2 GPM @ 70°F Vertical Lift At least 20 ft @ 70°F Hose Size 1.5" (sold separately) Warranty 3 years, all components Need More Power? The HillCo Honey Pump runs a 1/3 HP motor, lifts up to 12 ft of suction, pushes 20 ft of output head, and flows at ~4 GPM — better suited for larger operations or longer transfer distances. You May Also Need 1.5" Honey Pump Hose — Required to operate. Sold by the foot, custom cut. Float Switch — Auto-stops the pump when the source tank runs low. Browse More HillCo Honey Extracting Equipment
