COMPLETE Multi-purpose solution cleans, rinses, disinfects, stores, removes protein and rewets your lenses with lasting comfort. Directions: When remove your lenses:1. Wash and dry your hands prior to handling your lenses.2. Rub each side of the lens for 10 seconds. Place 3 drops or more of COMPLETE MPS on one side of the lens surface. Rub your lens gently from the centre to the edges for at least 10 seconds. (Never rub in a circular motion, because it may tear the lens and not clean the outer edge surface) Repeat the rubbing steps for the other side of the lens. 3. Rinse each of the lens for 5 seconds4. Soak for 6 hours Fill your contact lens case with fresh COMPLETE MPS and allow it soak for a minimum of 6 hours. When you insert your lenses:1. Wash and dry your hands prior to handling your lenses.2. Rinse each side of your lenses for 5 seconds to remove any debris before re-inserting lenses. Ingredients: COMPLETE Multi-purpose solution is a sterile, buffered isotonic solution which contains purified water, sodium chloride, potassium chloride, sodium phosphate dibasic (heptahydrate), Poloxamer 237 0.05%, edetate disodium, sodium phosphate monobasic (monohydrate) and preserved with polyhexamethylene biguanide 0.0001%.
