This Nyco Green Kleen degreaser penetrates and lifts out grease, oil, ink, coffee, blood and other durable stains from most washable surfaces. Contains no harmful chemicals, bleach or ammonia, it is non-toxic, biodegradable, and non-flammable. Spray proper dilution ratio on the surface to be cleaned, and allow 5 to 10 minutes for solution to dwell on heavily soiled floors. Do not spray directly onto fabrics! Wipe them with a rag and rinse with cold water. Stubborn stains may require additional applications and scrubbings. Large areas may require machine application, spraying or mopping of diluted product. Always test in an inconspicuous area for colorfastness.For additional options, don't forget to check out our complete line of floor scrubber accessories including floor care solutions, autoscrubber brushes, floor scrubber pads and much more.Uses & Dilution Ratios Dip Tanks - Use full strength for degreasing engine/machine parts. Concrete & Brick - To remove oil and grease apply a solution of 1:3 (1 part solution to 3 parts water). Allow to penetrate for 10 minutes. Agitate with stiff bristle brush. Rinse surface clean. Filter Cleaning - Remove filter from unit. Spray on a solution of 1:8 (1 part solution to 8 parts water). Allow to remain for 10 minutes. Rinse clean. Floor & General Cleaning - Dilute 1:64 (2 ounces of solution to 1 gallon of water). Mop or wipe on surface for usual cleaning method. Pressure Sprayer - Dilute at 8 to 12 ounces per gallon of water depending on soil content and use. Spray on full strength and let soak for heavily soiled areas. Wear eye protection. Removes dirt, grease, and grime. Carpet Cleaning - Use 2 ounces per gallon of hot water. Heavily soiled areas may require 4 ounces per gallon. Spot cleaning of Fabric and Carpets - Spray a 1:16 (1 part solution to 16 parts water) dilution onto a damp cloth. Blot stain from edge to center. Reapply as often as necessary until stain is removed. Do not spray full strength onto fabric or carpets.
