Full of vintage charm, the Cone Exterior Wall Light is a versatile addition to both traditional and modern spaces. With two steel wall sconce designs to choose from, each available in two sizes, its cone shaped shade in brass, copper or steel adds character and warmth. Available in eight finishes, it can be customised to suit any style, making it ideal for bathrooms, entryways or commercial applications. Features: Robust steel arms in gooseneck or straight styles in two sizes Shades in eight finishes for further customisation IP22 rating so can be used indoors or in a protected outdoor area About the Cone Exterior Wall Light: Design inspired by classic vintage and industrial factory lighting. The shades are available in eight finishes including the Federation Green and Black shades ubiquitous in warehouse lighting from the 1940's. Finishes include: Black, Federation Green, White, Aged Solid Brass, Bright Solid Brass, Aged Solid Copper, Bright Solid Copper and Vintage Steel. The black and green steel shades have a painted finish with a white inner. The brass shades are made from solid brass. The copper shades are made from solid copper. The Aged Solid Brass/Copper shades have been fired for a deeper aged look. The Bright Brass/Copper shades have been mildly buffed on the outside to give them a brighter finish and then left raw. The inside is cleaned (not buffed) and then left raw. The shades are then oil rubbed to preserve the look for longer. Both finishes will continue to patina over time dependant on the environmental conditions they are placed in. The bright finish will patina at a slower rate because of the oil-rubbed finish. Our brass and copper shades are made with 100% natural materials. The finishes are not designed to be a uniform, consistent finish. A consistent finish can only be achieved through electroplating over cheaper materials. The beauty of choosing natural materials are the characteristics of the imperfections and patina which continue to develop over time. The imperfections are not considered defects. The Vintage Steel shades are made from quality steel. The steel is left raw and then oil-rubbed to give it a matt finish and minimise the oxidisation/ rusting/ spotting. This preserves the raw vintage steel look. It will continue to patina though dependant on the environmental conditions it is placed in. The shades may display minor spot rusting from the method of finish. This is in line with the intended style and is not considered a defect. The large cone shade is paired with the extra large gooseneck arm and the long straight adjustable arm. The small cone shade is paired with the gooseneck arm and the short straight adjustable arm. The straight arm sconce features a 45° swivel lampholder to adjust upwards and downwards. To adjust the knuckles the wing nut screw needs to be loosened slightly. The knuckle is not to be adjusted with the wing nut still tightened in place. These wall sconces include a gland to seal entry points and rubber ring to seal the lamp holder shade holes. This light has an IP22 rating (protected against vertically falling drops of water). Always check with your electrician to see if this light is suitable for your desired placement. Please also consider suitability of materials for your installation location. This outdoor light is suitable for indoor use as well. This wall light takes a standard bayonet (B22) bulb. 40W max. Consider matching with other Cone Lights for a cohesive look. Please note: The Aged Solid Brass, Bright Solid Brass, Aged Solid Copper, Bright Solid Copper and Vintage Steel shades cannot be returned or exchanged.
