Conformable anti-slip tape for chequer plate steps and ramps Conformable Anti-Slip Tape is a self-adhesive grit tape built for chequer plate and Durbar plate surfaces, where flat tape can bridge over the raised pattern and lose grip. The aluminium substrate flexes to follow the plate profile, so the aluminium oxide coating stays in full contact with the surface. It is rated -30°C to +160°C and resists chemicals, minerals and UV, so it suits both indoor and outdoor use. Key features Conforms to ridged surfaces - the flexible aluminium backing presses into chequer plate and Durbar plate rather than sitting flat across it. R13 slip resistance - tested to ASTM C1028-96 at 1.14 dry and 0.98 wet. Wide temperature range - operates from -30°C to +160°C. Chemical, mineral and UV resistant - suits indoor and outdoor use. Self-adhesive - fits straight onto a clean, sound surface. Four widths, three colours - 25mm, 50mm, 100mm or 150mm, in black, yellow or a yellow and black hazard chevron. Where it is used Chequer plate and Durbar plate steps Fire escapes and external stairwells Ramps, slopes and loading bay edges Fixed ladders and access platforms Sizes and colours Choose a width to suit the step or plate run - 25mm and 50mm for stair nosings and ladder rungs, 100mm and 150mm for wider ramps and platform edges. Black and yellow suit general anti-slip marking; the yellow and black chevron is the usual choice for flagging a step edge or level change as a hazard. Specification Specification Detail Width 25mm / 50mm / 100mm / 150mm Length 18.3m Weight 1.2kg / 2kg / 3.5kg / 4.5kg Fixture Self-adhesive Slip resistance R13 Coating Aluminium oxide particles on aluminium substrate Applications Indoor and outdoor Temperature range -30°C to +160°C Test standard ASTM C1028-96 (1.14 dry / 0.98 wet) Colours Black, yellow, yellow & black hazard chevron
