The Control4 8 Channel Dimmer is a key component in the Control4 centralised lighting platform providing the ability to dim up to eight circuits of light. Control4 8 Channel Dimmer Key Features: • Controls up to eight loads and supports a variety of load types.• Each channel can be set to different dimming modes including Switch mode, Forward-Phase mode, Reverse Phase mode, and Autodetect mode.• Channel buttons allow for toggling on/off or ramping up/down a load.• Channel status LEDs indicate whether a load is on, off, or in short-circuit fault.• Module override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels.• Module status LED indicates if module power is on with normal operation, off, or in thermal overload.• Link/Activity LED indicates system link status, communication activity, or firmware update status.• Reset button can be used for factory default or various IP configuration settings.• Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control systemis installed or in case the controller malfunctions.• Module can be installed in either a Control4® 5- or 2-slot panel or a third-party DIN rail panel Control4 lighting components must be installed by a licenced electrician and programmed by an authorised Control4 programmer. For more information on Control4 lighting and automation please contact our custom installation division
