This Cooling Coil is constructed of stainless steel 8mm tubing and is designed to fit the Keg King Apollo Fermenter 30L Lids. To install, simply drill two holes in the expansion ports of your Apollo lid to accommodate the bulkheads of the cooling coil. Insert the threaded bulkheads through the holes using the silicone o-rings to create a seal on the underside of the lid. The threaded bulkheads will protrude through the lid and can be held tight by the hex nuts on the exterior of the lid.Once positioned, the coils in the tank can be slightly separated to increase the contact area with the liquid. Coils are offset so they will not impeded the operation of the plunge valve or centralised floating liquid pick up tube of the Apollo vessels. Dimensions: 380mm x 35mm x 40mm
