Features: Dry to touch in 30 minutes, recoat in 2 hours May be top coated with hot solvent finish coats after 24 hour cure (normal dry conditions) Provides barrier protection in mild-to-moderate corrosive environments Suitable For Use In USDA Inspected Facilities Alkyd Shop Coat Primer is a quick-drying formulation that can withstand mild-to-moderate atmospheric conditions. General Description: It provides a protective barrier and can be top coated with a variety of finishes and can also be used as a temporary coat for transporting fabricated pieces, which can then be blasted and recoated at the job site. In interior non-corrosive environments, Alkyd Shop Coat Primer can be left uncoated. Recommended For: Alkyd Shop Coat Primer is formulated for use in mild to moderate atmospheric exposures, where a quick turn-around primer is desired. This primer provides barrier protection on properly prepared surfaces, and may be top-coated with a variety of finishes. Alkyd Shop Coat Primer is ideal as a temporary transport coat on fabricated pieces that will be blasted at the job site and recoated or as an economical barrier primer or left uncoated in interior noncorrosive environments. Limitations: Do not apply if material, substrate or ambient temperature is below 50 °F (10 °C) or if within 5° of Dew Point. Spray application only. Not intended for severe chemically corrosive environments, immersion service or non-ferrous metals.
