Couple with Heart sets a clear visual theme for living rooms, offices, and gallery walls through a wall-mounted metal silhouette. The Couple with Heart wall art from Grandmix is a laser-cut couple-and-heart composition in powder-coated galvanized metal, figurative cutwork rendered with a heart silhouette that reads as design-school figurative rather than printed reproduction. Available in 5 sizes across Black and White finishes. Why It Works Couple-and-heart composition in cut powder-coated galvanized metal: Laser-cut couple silhouettes paired with a heart accent, graphic, modern, and reads beautifully above an anniversary console, bedroom feature wall, or wedding-gift display. Five sizes for any wall span: From 18-inch accent to 47-inch oversized, pick by wall width above a console, vanity, or master-bed headboard wall. powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, bedroom condensation, and covered outdoor placement, direct rain on a covered porch is acceptable. Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above. Key Specs Dimensions: Five sizes (H × W): 18 x 15 in / 46 x 38 cm; 24 x 20 in / 61 x 51 cm; 32 x 27 in / 81 x 68 cm; 39 x 33 in / 99 x 83 cm; 47 x 39 in / 119 x 100 cm. Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant) Finishes: Black, White Weight: From about 1.5 kg / 3.3 lb at the smallest size Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight. What's Included Couple with Heart (size and finish as ordered) Mounting screws and wall anchors Care instructions How to Use and Install Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight. Care Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure. Frequently Asked Questions Where does this work best? Master bedroom feature walls above the headboard, anniversary gift displays, dining nook accent walls, dressing room or vanity walls, and reading-corner displays all suit this design. The romantic silhouette pairs well with linen or velvet bedding palettes, soft-warm lighting, and minimal supporting decor. How does it mount to the wall? Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile. Is it safe for outdoor use? Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life. How do I match the finish to existing decor? Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving. How do I clean the wall art? Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
Related
Related
Related
Related