REMCO 4T65E 4T65 Friction Kit [97-ON]

REMCO TRANSMISSION PARTS Verified independent store

→

When a 4T65E or 4T65 rebuild calls for fresh friction plates across every clutch pack, this kit delivers all 26 plates in a single shipment without forcing you to track down six se parate part numbers. What sets it apart is the specificity: each of the six plate types in the box matches a defined clutch position and design, including the hi-energy 2nd clutch plates and the one-sided 3rd clutch plates that often get overlooked when ordering piecemeal.The kit breaks down as follows. Six hi-energy friction plates cover the 2nd clutch pack for 1997-and-later units. Five one-sided internal and five one-sided external plates cover the 3rd clutch, compatible from 1989 forward. Four input clutch frictions at .063 inch thickness with 30 teeth serve the pawl diode design input found in 2003-and-later automatic transmission units. Four additional frictions under part number 24202333 round out the mid-range clutch positions. Two 4th clutch plates at .070 inch thickness with 32 teeth complete the set.REMCO has been working in automatic transmission parts since 1991. Each kit is assembled here, piece by piece, and checked against its own parts list before shipping. The box includes that list so you can verify count on arrival.Before ordering, confirm the transmission code is 4T65E or 4T65, that the vehicle application is 1997 or later, and that the input design is the pawl diode type if you are relying on the four input clutch plates. This kit covers frictions only. Steel plates, filter, seals, gaskets, and band are not included. Stop ordering plates one at a time: this kit puts all six friction plate specifications for the 4T65E and 4T65 in one box, ready to open and install without extra sourcing time. This is a Friction Kit only. It does not include steel plates, seals, gaskets, filter, band, or any other rebuild components. Review your parts list before ordering to avoid a return. Every friction position in this kit is specific: 6 hi-energy 2nd clutch plates, 5 one-sided 3rd clutch internal, 5 one-sided 3rd clutch external, 4 input clutch 30-tooth for pawl diode design, 4 additional frictions, and 2 4th clutch 32-tooth plates. 26 friction plates total across 6 part numbers, covering 2nd, 3rd, input, and 4th clutch positions. Kit weighs 2 lb. REMCO pulls and inspects each piece against the parts list before the box closes. Confirm your transmission code is 4T65E or 4T65 and that your application is 1997 or later before ordering. Input clutch plates in this kit fit pawl diode design units from 2003 and up. Show more