REMCO 4R70W 4R75W Friction Kit [90-ON]

REMCO TRANSMISSION PARTS Verified independent store

→

When a 4R70W or 4R75W automatic transmission rebuild stalls because friction plates are scattered across multiple orders, this kit puts all four clutch sets in one box. That is the single most practical reason to use it: 20 friction plates covering the direct, reverse, forward, and intermediate circuits arrive together, checked against a parts list that ships inside the box.What makes this kit specific is its plate count and specs. The direct clutch set carries 6 hi-energy frictions at .067 inch thin. The reverse set has 5 frictions at .061 inch with a small outer diameter of 5.250 inches. The forward set adds 5 more frictions for the stamped drum, large OD at 5.36 inches, also .061 inch thick. The intermediate clutch set rounds out the kit with 4 hi-energy grooved frictions at .066 inch. Those four specs are not interchangeable, and having the wrong plate in the wrong circuit is one of the most common causes of a comeback.This is a Friction Kit, which means it covers frictions and nothing else. There are no steel plates, no overhaul gasket set, no filter, no band, and no seals in this box. A technician ordering a complete rebuild will need those items separately. Read your job sheet before placing the order.REMCO has been working in automatic transmissions since 1991. Every kit is assembled here by hand, piece by piece, and reviewed against its contents list before it leaves. The box weighs 3 lb. The parts list is inside.Before ordering, pull the ID tag off the unit and confirm you are working with a 4R70W or 4R75W, application [90-ON]. Do not rely on vehicle year alone. All 20 friction plates cover four clutch circuits in one order: direct, reverse, forward, and intermediate, so the rebuild moves forward without hunting for individual frictions. This kit contains friction plates ONLY. No steel plates, no filter, no gaskets, no seals, no band. Check your parts list before ordering to avoid a return trip. Four distinct friction specs under one part number: 6 hi-energy direct clutch (.067 thin), 5 reverse (.061 small OD 5.250), 5 forward stamped drum large OD 5.36 (.061), and 4 intermediate hi-energy grooved (.066). Kit ships at 3 lb and contains exactly 20 pieces: 6 direct clutch frictions, 5 reverse frictions, 5 forward frictions, 4 intermediate frictions. REMCO picks and checks each piece against the parts list before packing. Confirm the transmission code on the unit before ordering. This kit applies to 4R70W and 4R75W automatic transmissions. Year range [90-ON]. Show more