TP-Link Pharos Outdoor CPE 2.4Ghz 300Mbps | CPE210 Description TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users. Enterprise Hardware With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉). Advanced Antenna System Built-in High Gain Dual-Polarized Antenna Dedicated metal reflector ensures higher gain and lower noise interference 5km+ Wireless Data Transmission Specially designed for outdoor uses, ideal for long distance wireless data transmission over 5km+, tested in the field. TP-LINK MAXtream TDMA Technology As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology. Pharos Control – Centralized Management System CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control. Features Built-in 9dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 27dBm/500mw System-level optimizations for more than 5km long range wireless transmission TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications Centralized Management System – Pharos Control AP / Client / AP Router / AP Client Router (WISP) operation modes Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely Specification HARDWARE FEATURES Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc Memory 64MB DDR2 RAM, 8MB Flash Interface 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)1 Grounding Terminal1 Reset Button Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)Voltage range: 16-27VDC Power Consumption 10.5 Watts MaxNote: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Dimensions ( W x D x H ) 8.8 x 3.1 x 2.4 in. Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional AntennaBeam Width: 65° (H-Plane) / 35° (E-Plane) Protection 15KV ESD Protection6KV Lightning Protection Enclosure Outdoor ASA stabilized plastic materialIPX5 waterproof Certification WIRELESS FEATURES Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled) Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled) Wireless Speeds Up to 300Mbps (40MHz,Dynamic)Up to 144.4Mbps (20MHz,Dynamic)Up to 72.2Mbps (10MHz,Dynamic)Up to 36.1Mbps (5MHz,Dynamic) Frequency 2.4~2.483GHz Transmission Power 27dBm/500mw (1dBm step adjustable) SOFTWARE FEATURES Wireless Configurations Pharos MAXtream TDMA Technology802.11b/g/n modesSelectable Channel Width: 5/10/20/40MHzAutomatic Channel SelectionTransmission Power ControlDynamic Frequency Selection (DFS)WDS Enable/DisableSecurity: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP EncryptionSSID Broadcast Enable/DisableMulti-SSID with VLAN Tagging (AP mode only)Distance/ACK Timeout SettingWireless MAC Address FilterWireless Advanced:> Beacon Interval/RTS Threshold/Fragmentation> Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia Management Discovery and Remote Management via Pharos Control applicationHTTP/HTTPS Web-based managementSystem LogSNMP Agent(v2c)Ping Watch DogDynamic DDNSSSH Server System Tools Wireless Signal Quality Indicators:Signal Strength/Noise/Transmit CCQ/CPU/MemoryMonitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCPSpectrum AnalyzerSpeed TestPingTraceroute System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applicationsHardware watch dog POE ADAPTER FEATURES Dimensions(W x D x H) 4.3 x 2.2 x 1.3 in Interfaces 1 AC Jack with Earth Ground1 10/100Mbps Shielded Ethernet Port (Power + Data)1 10/100Mbps Shielded Ethernet Port (Data) Button Remote Reset Button Power Status LEDs Green Input 100-240VAC, 50/60Hz Output 24VDC, 0.6A Max+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) Efficiency > 80% Certifications FCC OTHERS Certification FCC, RoHS, IPX5 Package Contents Outdoor Wireless CPE24VDC Passive PoE AdapterPole Mounting StrapsAC Power CordInstallation Guide Environment Operating Temperature: -40℃~70℃ (-40℉~158℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~95% non-condensing
Related
Related
Related
Related