Application instructions (home iron)• Cut material – don’t mirror!• Weed excess material• Mask with TTD High Tack Mask• Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 15 seconds• If areas of design lift after application, replace cover sheetand re-press for 10 seconds• Peel carrier hot or cold Application Instructions (heat press)• Cut material – don’t mirror!• Weed excess material• Mask with TTD High Tack Mask• Preheat garment for 2-3 seconds• Apply design at 305°F/150°C• Use medium pressure for 8-12 seconds• Peel carrier hot or cold Technical Guide Adhere to Thickness 10(70) micron Temperature 140-150℃ Pressure Medium 100% Cotton100% Polyester100% Poly & Cotton BlendsLycra & SpandexSublimated PolyesterNeoprene Adhesive Sticky Time 8-12 sec Peel Hot, Warm Peel Cutter Blade Washing Condition Storage Condition Blade Blade:45˚ DetergentStandard(Household) Do not twist strongly Cool and dry placewithout direct Sunlight Don’t use SteamAvoid direct contact 60℃ or below
