This large and crazy layered spinning project is just plain fun to watch!! This red, white and blue design has three layers that spin independently in the wind with the middle layer spinning in the opposite direction. (40" in diameter) You may also want to purchase our Crazy Spinner Parts Kit, WGKIT11, which includes the hard to find parts needed to make one spinner. Project also requires 3 fiberglass Yard Stakes #YS18 and 1 pkg Clamps #YSC2 (not included in Spinner Parts Kit). More Info Dimensions: 40" dia. Wood:two 24" x 24" x 1/8" thick pieces of Luan plywood (#LUAN812)one 67" long 2X4 pine board and one 36" long 1X6 pine boardTools:table saw or bandsaw with a smooth cutting non-chipping bladeelectric drill and 1/2", 3/8" and 3/16" dia. drill bitsHardware:three 3/8" dia. x 18" long fiberglass yard stakes (#YS18)four 3/8" yard stake clamps with screws (#YSC2)Hardware Kit Available - WGKIT11Supplies:sand paper-medium & fine gritsglue-outdoor wood glueglue-2 part epoxy, slow drygrease-white lithium sprayPaint:White water base primer (#PRIMQT) for a base coatPP07-geranium redPP10-summer sky bluePP14-cloud whitePP21-wrought iron black Sealer: (Optional) High-grade, non-yellowing, semi-gloss UV protected project sealer for outdoor protection.
Related
Related