CreatBot PEEK-250

RepRap Warehouse Verified independent store

→

Meet the CreatBot PEEK-250, a powerful desktop 3D printer that brings heavy-duty industrial manufacturing right to your workspace. Built specifically to handle high-performance pla stics like PEEK and PEI, it features a 480°C single nozzle, a 200°C heated bed, and an incredibly hot 200°C heated chamber. To keep everything running smoothly and safely at those extreme temperatures, it uses a smart liquid cooling system wrapped in quadruple-layer insulation. It gives you a complete, all-in-one setup for printing incredibly tough, professional-grade parts without taking up your entire floor. The World's First Desktop high-temperature 3D printer with a max hot chamber of 200°C When the hot chamber reaches 180°C, the outer surface temperature is less than 40°C (after 5 hours of heating). Raise the hot chamber temperature to 180°C within 20 min Why is a 180 °C hot chamber so important? An ambient temperature of 180°C is required for PEEK to anneal. Therefore, after the device prints the PEEK model, it can be annealed directly in the device. The advantages of doing so are: There is no need to remove the model from the platform to avoid the bottom of the model losing platform adhesion, resulting in the internal stress of the bottom model losing platform restraint, causing the bottom of the model to deform after post-processing. Avoid shutting down and cooling the model to take out the model. There is no exchange of hot and cold environments, which causes the model to have a large temperature difference in a short period of time, and the internal stress is fixed, and it cannot be effectively post-heat-treated. After printing, the annealing treatment can be set directly inside the printer without any time delay. For example, it is set in advance to stand in a 180°C environment for 5 hours after printing, and then stand in a 120°C environment for 5 hours to fully anneal the PEEK parts 180°C is the temperature at which PEI material can be perfectly printed. Printing environment temperature requirements: Usually set between 160°C and 200°C to ensure that the material can be fully extruded and bonded and reduce the internal stress after molding to prevent cracking. The recommended ambient temperature is 180°C to improve fluidity, obtain higher combined line strength, and improve heat resistance and chemical corrosion resistance by reducing molding internal stress. PEI has hygroscopic properties and can cause material degradation. The humidity value is required to be less than 0.02%. The drying conditions are 150°C and 4 hours of drying treatment, and the drying treatment can be carried out directly in the cavity PEI materials also usually need to be annealed after molding to eliminate the internal stress generated during the molding process. The advantages of direct annealing are the same as PEEK. Ultra-high temperature extruder system Equipped with a double-tooth silicon carbide extruder, it offers high torque, super wear resistance, and no step loss. It can print all filaments below 500°C, especially carbon fibre and glass fibre materials. A water-cooling device is necessary; it is key to smooth printing with high-temperature filament. Hot-end is an Integrated die-casting wear-resistant nozzle, which can be replaced within 30 seconds without removing other parts or screws. 200°C thermally uniform chamber The special spoiler device allows the hot air in the cavity to circulate 360°, ensuring the cavity is heated evenly and that the polymer material model is uniformly crystallized at any angle, resulting in perfect formation. Chamber thermal insulation/safety For the first time, an aviation-grade heat-insulating sports protective cover is used in professional-grade equipment. Through clever design, multi-path heat dissipation, customized high-temperature resistant parts, and the use of multi-layer heat-insulating materials, when the chamber temperature reaches 180°C, the temperature of the front door, top door, screen area, body, and side panel area of the machine is within 40°C, ensuring the safety of users. High temperature platform 200°C Aviation-grade ultra-flat platform + polymer-based coating Natural flatness 0.05mm High temperature flatness 0.1mm (cavity temperature 180°C) No manual or automatic levelling required, avoiding manual levelling or sensor failure in high-temperature environments One-stop annealing function After the model is printed, there is no need to peel the model from the platform, cool it naturally, or anneal it in the annealing furnace. You can select the 'direct annealing after printing' function for the corresponding material, such as PEEK, PEI, etc., on the screen in advance. You can also modify the built-in annealing temperature and time in the settings to achieve one-click annealing. Material Types Supported by PEEK 3D Printers Creatbot 3D printers have strong adaptability and stability for various filaments. Relying on hardware advantages (all-steel body, precise linear guides, adjustable-temperature nozzle/chamber, etc.), they can perfectly match all plastic 3D printing filaments, achieving optimal filament printing results and aligning with their material characteristics. High Performance Materials Material Key Features Applications PEEK Ultra-high strength, 250°C+ temperature resistant, chemical corrosion resistant Aerospace, medical implants, automotive PEEK-CF Extremely high rigidity, lightweight, fatigue resistant High-load structural parts PEEK-GF High strength, excellent dimensional stability Industrial parts PEI 1010 High temperature resistant, sterilizable, eco-friendly Medical, food contact parts PEI 9085 Flame retardant (UL94 V0), high strength, heat resistant Aerospace, rail transportation Standard Materials Material Key Features Applications PLA Easy to print, biodegradable, low cost Creative products, education, simple prototypes PLA-CF Carbon fiber reinforced, high rigidity, lightweight Brackets, model frames, simple tooling PETG Balanced, impact resistant, semi-transparent Electronic enclosures, daily containers, transparent parts TPU 95A Hard elastic, wear-resistant, bendable Seals, wearable devices, soft parts PC High transparency, high strength, high temperature resistant Protective shells, car lamp covers, high temperature fixtures Engineering Materials Material Key Features Applications ABS High strength, machinable, impact resistant Car interiors, tooling fixtures, functional prototypes ASA Weather resistant, UV resistant, better than ABS Outdoor sculptures, car exteriors, billboards PVDF Corrosion resistant, flame retardant, insulating, high temperature resistant Chemical pipelines, semiconductor parts, anti-corrosion structures UltraPA High toughness, wear-resistant, self-lubricating Gears, bearings, mechanical transmission parts UltraPA-CF Carbon fiber reinforced, high rigidity, lightweight Drones, automotive lightweight, high strength tooling UltraPA-GF Glass fiber reinforced, insulating, low cost Insulating brackets, high temperature fixtures, electronic enclosures PET-CF Carbon fiber modified, low moisture absorption, dimensionally stable Mechanical brackets, car parts, industrial load-bearing parts PPS-CF High temperature resistant, corrosion resistant, extremely dimensionally stable Motor housings, chemical parts, engine peripherals Support Materials Material Key Features Applications PVA Water soluble, no residue Compatible with PLA, PETG S-270 Industrial grade, high temperature resistant Compatible with Nylon, PC S-350 High temperature dedicated, high stability Compatible with PEEK, PEI Specs Temperature Nozzle Max. Temperature 480℃ Chamber Temperature 200℃ Platform Max. Temperature 200℃ Speed Best Printing speed 55 mm/s Max. Printing speed 180mm/s Software Software Creatware, Simplify3D, Cura, Slic3r Operating Systems Windowsall, macOS Print File Type Gcode, STL, 3MF, OBJ, AMF, STP, STEP Electrical Input Power 200V~240V Rated Power 2500W Screen 7'' full color touch screen, multi-language Print Method USB Connectivity/USB Disk Special Function Outage Restored Save data when power is off Filament Detection Pause printing when filament run out Thermal insulation Three layer insulation+Active air cooling (Chamber temp. reaches 180 ° C, the external surface temp. is less than 40 ° C) High temperature accessories High temperature resistance motors, linear rails, belts and circuits to ensure long time high temperature printing. Doors cooling Active air cooling Mechanical Cooling Air pump cooling & water cooling Platform PCB aluminum + PEEK print board Positioning Precision X Y axis 0.0127mm, Z axis 0.00125mm Extruder Directly Drive Machine Construction Fully enclosed hot chamber Size & Weight Machine Size 630*555*815mm N.W 100 kg Packing Size 740*680*1030mm G.W 125 kg Show more