Smooth Coat Adds that final dazzling finish to your foam project! Creamy-smooth, white, rock-hard, cement-like foam finish. Use directly on foam. Easy to make it look just like wood, stone, metal and bone. Perfect base for creating gorgeous natural tints with acid stains or our StainFast water based stain system. Does not stick to itself so you MUST use Boost instead of water to apply multiple coats. Use indoors or out. Rain, freeze, and sun resistant. Smooth Coat DOES NOT stick to itself! You MUST use Boost instead of water if applying multiple coats! California Proposition 65 Warning: This product contains crystalline silica, a chemical known to the State of California to cause cancer, birth defects, and reproductive harm. While mixing the dry ingredients use a dust mask or respirator with an RPE of 20 or 40. For more information, go to www.P65Warnings.ca.gov or HWFF's information page: California Proposition 65. Features: Coat It Smooth It Texture It Sand It Stain It Tint It Paint It Soap and water clean-up Made in USA Used For: Coating Styrofoam, white beaded EPS, and extruded XPS foam Adding strength, texture and a weather-resistant surface Theatrical and studio props and backdrops Instructions Download the instruction manual here. Coverage Thickness: 1/64" 1/16" 1/4" 3lbs: 36 sq ft 9 sq ft 2.25 sq ft 25lbs: 288 sq ft 72 sq ft 18 sq ft MIXING: Mix in a clean container with clean water or Boost. Start with 1 part cool water or Boost per 3 parts powder (for example, 1 cup of water or Boost per 3 cups of powder). Add water or Boost to powder and mix until Create Coat turns to a smooth paste. You can add more powder or liquid until you have your ideal paste. Do not overmix. If you plan to apply multiple coats, you MUST use Boost as part of the liquid ingredient! Create Coat DOES NOT stick to itself! You can achieve excellent self adhesion when Boost is diluted with 3 parts water to 1 part Boost. Mixing Chart Create Coat Water or Boost 3 Parts (by volume): 1 Part 3lbs: 1 Cup/8oz (Makes slightly dry mix) 25lbs: ½ Gallon/64oz (Makes slightly dry mix) 50lbs: 1 Gallon/128oz (Makes slightly dry mix) APPLYING: From 1/32 inch to 1/2 inch. Use a brush or trowel. Use Boost fortifier if you want multiple coats. SET TIME: Use within 20 mins. Hard in 1-2 hrs. Max strength and bond in 24 hrs. FINISHING: Smooth or texture while drying. Difficult to sand once dry. Stain or paint. CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens. Additional Info: Click here for Foam Coating and Gluing FAQs WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available. California Proposition 65 Warning: This product contains crystalline silica, a chemical known to the State of California to cause cancer, birth defects, and reproductive harm. While mixing the dry ingredients use a dust mask or respirator with an RPE of 20 or 40. For more information, go to www.P65Warnings.ca.gov or HWFF's information page: California Proposition 65.
