The Create+ Vented Collection Cup is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel Vented Collection Cup integrates into a modular distilling system, facilitating the secure connection of distillate collection tubing while allowing safe venting of pressure during the distillation process. KEY FEATURES: Connects to 2" tri-clamp distilling accessories 304 grade stainless steel construction High temperature resistant food grade silicone INSTRUCTIONS: Insert Collection Cup into your distilling system, ensure the vent weld is at least horizontal so that distillate flows out of the barbed tube, place a silicone gasket in the tri-clamp connection and secure with a tri-clamp. CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run. CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris. CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. WHAT'S INCLUDED IN THE BOX: Vented Collection Cup with Ø10 mm Barbed Tube and Vent Port 2" Tri-clamp 2" Silicone Gasket SPECIFICATIONS: Dimenions: H 11.3 cm x W 7.1 cm x D 5.1 cm Vent port/tube Ø12 mm Barbed tube Ø10 mm Weight: 0.170 kg NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications: A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome. A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column. We recommend external support if: Your column & condenser exceeds the above specifications. The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight. If the column & condenser is noticeably leaning. Compatible Modular Items: Create+ | Sight Glass | Botanical Basket Set Create+ | Sight Glass Bubble Plate Create+ | Still Spirits | 90° Elbow Section Create+ | Still Spirits | Multi-Tube Condenser Create+ | Still Spirits | Thermowell 90° Elbow Section Grainfather | Distilling Lid T500 Condenser Attachments Kit Grainfather | Distilling Lid T500 Alembic Attachment Kit
