The CP2E is a compact Ethernet control system designed for small to medium sized residential and commercial control applications. Three built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and Ethernet provide for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors such as the CP2. Key Features 2-Series engine | Dual-bus architecture Cresnet port - master/slave selectable 10/100 Ethernet | SSL encryption e-Control 2 and RoomView enabled | SNMP support 3 Com ports (RS-232/422/485) 8 IR/serial ports 8 Versiport I/O ports 8 Low-voltage relay ports Single-space EIA rack-mountable Processor CPU 32-bit Freescale ColdFire® Microprocessor Memory SDRAM 32 MB NVRAM 256 KB Flash 4 MB Operating System Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® Ethernet 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications Connectors COM A - C (3) DB9 male, bidirectional RS-232/422/485 ports;Up to 115.2k baud;Hardware and software handshaking support;All ports support C2N-NPA8 Network Poll Accelerator INFRARED-SERIAL OUTPUT A - H (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;IR output up to 1.2 MHz;1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;Individual signal generator per port, allowing simultaneous firing of all ports I/O Versiports 1 - 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;Programmable 5 Volts, 2k ohms pull-up resistor per pin RELAY OUTPUT 1 - 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;Rated 1 Amp, 30 Volts AC/DC;MOV arc suppression across contacts LAN (1) 8-wire RJ45 with 2 LED indicators;10/100BaseT Ethernet port;Green LED indicates link status;Yellow LED indicates Ethernet activity COMPUTER (1) DB9 female, RS-232 computer console port NET (1) 4-pin 5mm detachable terminal block;Cresnet port, Master/Slave selectable;Expandable via C2N-NPA8 Network Poll Accelerator 24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input;(PW-2420RU power supply sold separately);Passes through to NET port to power Cresnet devices Reset Buttons HW-R Hardware reset (reboots the control system) SW-R Software reset (restarts the SIMPL program) LED Indicators PWR (1 green) Indicates DC power supplied to unit NET (1 yellow) Indicates Cresnet bus activity MSG (1 red) Indicates control system has generated an error message LNK (1 red) Indicates a valid connection on LAN port ACT (1 red) Indicates activity on LAN port Power Requirements 24 Watts (1 Amp) @ 24 Volts DC (PW-2420RU power supply sold separately) Available Cresnet Power 26 Watts using PW-2420RU (sold separately) Cresnet Power Usage 24 Watts (1 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector Environmental Temperature 41° to 113°F (5° to 45°C) Humidity 10% to 90% RH (non-condensing) Enclosure Chassis Steel, black matte powder coat finish Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height 1.80 in (4.57 cm);1.70 in (4.32 cm) without feet Width 17.03 in (43.24 cm);19.0 in (48.26 cm) with ears Depth 6.66 in (16.91 cm) Weight 3.54 lbs (1.59 kg)
Related
Related
Related
Related