Give your unused USB MIDI controllers a second life and use them as sequencers for your Eurorack system! The Triggerpad turns USB Midi controllers with an 8x8 grid into a trigger/gate sequencer. The controller is connected to the module via a USB cable and offers the ability to create and save patterns. The step length can be set individually for each channel from 1-64. This makes it possible to create polyrythmic sequences. For a deeper understanding of the workflow, we suggest you watch the video linked below. Available from spring 2024! Features: 8 channels (start/stop individually) 1 to 64 steps pattern length (per channel) 8 substeps per step (128th notes) 7 levels of velocity of the trigger pulses (0-10V) 250us – 1 step adjustable trigger/gate length Session mode: record patterns quantized to substeps or 16th notes Program sequences in step sequencer mode Global and per channel shuffle Program shuffle patterns: define which steps will be shuffled Switch between patterns instantly or chain up to 64 patterns Set the BPM from 0.5 to 400 Set clock divider and clock multiplier on clock input and output No deep menu diving, tailored for live performance Store and recall 64 snapshots of all 64 scenes on USB drives Firmware updates possible via USB port on the rear panel Inputs and outputs: 8 dynamic trigger/gate outputs (0-10V) USB MIDI Host Clock in Clock out Reset in Reset out Compatibility: Launchpad Pro Mk3 Launchpad X Launchpad Mini Mk3 Launchpad Mini Mk2 Launchpad Pro Launchpad Mk2 Launchpad S APC Mini Mk1 APC Mini Mk2 Power consumption: 120mA at +12V and 20mA at -12V (without USB MIDI controller connected) USB MIDI controller draws additional up to 150 mA at +12 V Depth: 39mm 6 HP
