The Crown Audio CDI2X1200BL, 2-Channel DriveCore Series Power Amplifier with BLU Link - 1200 W is utilizing technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|1200 offers streamlined functionality for most large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more. .iframe-container{ position: relative; width: 100%; padding-bottom: 56.25%; height: 0; } .iframe-container iframe{ position: absolute; top:0; left: 0; width: 100%; height: 100%; } The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 2-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|1200 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs. Product Specifications: Number of Channels: 2 Amplifier Power Rating: 1200 W per Channel 2400 W Bridged Load Impedance / Voltage: Stereo: 2 / 4 / 8 / 16 Ohms per Channel 70 / 100 V per Channel Bridged: 4 / 8 / 16 Ohms 140 / 200 V Performance: Frequency Response: 20 Hz to 20 kHz ±0.25 dB (8 Ohms) Damping Factor: > 1000 Input Sensitivity: Line: 0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms) 1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V) 1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V) Input Impedance: 10 Kilohms (Balanced) 5 Kilohms (Unbalanced) Max Gain: 34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V) Max Input Level: +20 dBu SNR: > 104 dB THD: 0.35% (at Rated Power) Intermodulation Distortion: ≤ 0.35% Crosstalk: > 80 dB (Below Rated Power) Common Mode Rejection Ratio (CMRR): > 70 dB Signal Processing: DSP: 32-Bit Floating Point DSP at 96 kHz Audio Delay: Adjustable Up to 1000 ms per Channel Crossover: High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel High-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel Low-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley EQ: 8-Band Parametric EQ per Channel Limiting: Yes Connectivity: Analog Audio I/O: 1x Block 6-Pin Balanced Line Input 1x Barrier Strip 4-Pin Speaker Output Digital I/O: 1x RJ45 Ethernet Input/Output (Control) 2x RJ45 BLU-Link Input/Output (I/O) USB I/O: No Power: AC Input Power: Universal: 100 to 240 VAC, 50 / 60 Hz AC Power Connector: 1x IEC 15 A / NEMA 5-15 Current Consumption: 120 VAC: 3.6 to 7.2 A (1/8 Power) 5.4 to 9.1 A (1/3 Power) 230 VAC: 2 to 2.1 A (1/8 Power) 4.5 to 4.9 A (1/3 Power) "Power Consumption: 120 VAC: 130 to 167 W (1/8 Power) 204 to 265 (1/3 Power) 230 VAC: 117 to 149 W (1/8 Power) 196 to 313 (1/3 Power)" Physical: Display & Indicators: Front Panel: 1x Multi-Color Graphic LCD Rackmount Size: 2 U Cooling: Fan (Variable Speed) Thermal Dissipation: 1068 BTU/hr (Maximum) Dimensions: 19.0 x 3.5 x 14.7" / 48.3 x 8.9 x 37.4 cm Weight: 17.2 lbs. / 7.8 kg
