The Crown XLS 2502 Stereo Power Amplifier offers 775W at 4 Ohm in a lightweight chassis using the company's ultra-efficient DriveCore Class D amplification platform. The amplifier includes built-in DSP with a dedicated band pass filter per channel, an integrated PureBand Crossover System, and Peakx Limiters to provide maximum output while protecting your speakers. For inputs, the rear panel includes a pair of XLR-3F connectors, 1/4" and RCA inputs for flexible connections with a selectable input sensitivity of either 1.4 Vrms or 0.775 Vrms. Outputs are provided on both SpeakOn and binding post connectors. You can set the amplifier's sleep mode for a designated period of time without having to press a button, as well as turn off all LED indicators except for clip and thermal to reduce distractions in dark venues. A security mode can be engaged to disable menu buttons, which can be locked and unlocked by entering a combination code. Full system reset allows for factory settings to be restored and a remote power trigger allows you to turn the unit on and off. Connectors Input2x XLR2x RCA2x 1/4" / 6.35 mm (can be used as a loop-thru to other amplifiers)OutputBinding Post (Channel 1 & 2): 2 Pairs4-Pole Speakon: 2 (Channel 1 offers Channel 1 & 2 wiring or Bridge Mode wiring) Sensitivity 1.4 Vrms Amplifier Power 1200 W at 2 ohm per channel 775 W at 4 ohm per channel440 W at 8 ohm per channel 2400 W at 4 ohm bridged 1550 W at 8 ohm bridged Frequency Response At 1 W, 20 to 20,000 Hz: +0 dB, -1 dB Signal to Noise Ratio >103 dB (at 0.775 Vrms sensitivity, Signal to Noise is 6 dB lower) THD 85 dB At 20,000 Hz: >55 dB Dimensions (W x H x D) 19 x 3.5 x 10.7" (48.3 x 8.9 x 27.2 cm) Weight 10.8 lb (4.9 kg)
